Laser Device; Laser Safety Warning; Certification And Classification Information; Laser Product Label - Cisco MDS 8/12c User Manual

Cisco mds 8gb fabric switch for hp bladesystem c-class user guide (5697-0339, november 2010)
Table of Contents

Advertisement

Laser device

All HP systems equipped with a laser device comply with safety standards, including International
Electrotechnical Commission (IEC) 825. With specific regard to the laser, the equipment complies with
laser product performance standards set by government agencies as a Class 1 laser product. The product
does not emit hazardous light.

Laser safety warning

WARNING!
To reduce the risk of exposure to hazardous radiation:
Do not try to open the laser device enclosure. There are no user-serviceable components inside.
Do not operate controls, make adjustments, or perform procedures to the laser device other than those
specified herein.
Allow only HP authorized service technicians to repair the laser device.

Certification and classification information

This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre
Channel communications port.
In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. A
label on the plastic FO transceiver housing indicates the certification.
Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in IEC 825–1:1993 and EN 60825–1:1994, including Amendment 1 1:1996 and
Amendment 2:2001.

Laser product label

The optional label or equivalent may be located on the surface of the HP supplied laser device. This label
indicates that the product is classified as a CLASS 1 LASER PRODUCT.

International notices and statements

Canadian notice (avis Canadien)

Class A equipment

This Class A Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

European Union notice

Products bearing the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community and if this product
has telecommunication functionality, the R&TTE Directive (1995/5/EC).
Compliance with these directives implies conformity to the following European Norms (the equivalent
international standards and regulations are in parentheses):
EN55022 (CISPR 22) – Electromagnetic Interference
34
B Regulatory Compliance and Safety

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mds 9000

Table of Contents