HP Carrier-grade cc2300 Safety And Regulatory Information Manual page 6

HP Carrier Grade Server Safety and Regulatory Information
Lithium Battery Warning
Cabinet Safety Precautions
Declaration of Conformity
FCC Statement (USA Only)
Canada RFI Statement
European Union RFI Statement
Acoustics (Germany)
Australian C-Tick Label
Laser Safety
Product Information
For detailed information on the HP Carrier Grade Server product, please go to the http://docs.hp.com Web site (in
the Systems Hardware selection).
Regulatory Information
For your protection, this product has been tested for conformance to various national and international regulations
and standards. The scope of this regulatory testing includes electrical and mechanical safety, electromagnetic
emissions, immunity, acoustics and hazardous materials.
When required, approvals are obtained from third party test agencies. Approval marks appear on the product label.
In addition, various regulatory bodies require some information under the headings listed in this section.
Electrical Safety
Locate the DC outlet near the computer! The DC power cords are this product's main DC disconnect devices and
must be easily accessible at all times.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as, a PCI card or Memory SIMM), you must observe
the following antistatic precautions to prevent damage. An ESD kit (HP Part Number A5201-68004) is available
(or supplied with Memory additions). This kit contains one wrist strap, one conductive sheet, and one anti-static
foam pad.
• Always wear a grounded wrist strap when working around the system, and when handling printed circuit
boards.
• Treat all assemblies, components and interface connections as static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a minimum while removing or installing boards,
to minimize buildup of static charge.
4 English