HP BL860c Installation Manual page 56

3.
Disable IP Binding
1.
2.
8. Configure HP SMH to restrict login access based on the IP address of the system from which the login
is attempted.
The following options are available:
Enter 1 to enable an IP Restricted Login, which sets it to ON. IP Restricted Login:ON appears.
To enable the IP Restricted Login:
1.
2.
56 Installing HP SMH directly on Itanium-based Linux operating systems
A. Enter 1 to add an IP address. You are prompted for the IP address.
B. Enter the IP address to be added. IP Address: YourIPAddress appears. You are
prompted for the netmask.
C. Enter the netmask. netmask: YourNetmask appears.
Note: You can add or delete as many IP addresses as you want.
To delete an IP address:
A. Enter 2.
B. Enter the number of the IP address or netmask to be deleted. The IP address or netmask
is removed from the IP address or netmask list.
Note: The masking field is not required for IPv6 addresses.
Enter n to go to the next screen. The IP Restricted Login screen appears.
Enter 2 to disable the IP Binding, which sets it to OFF. IP Binding: OFF appears.
Enter n to go to the next screen or enter p to go to the previous screen. The IP Restricted
Login screen appears.
Enter 1. IP Restricted Login is set to ON.
Enter n for next. The Set IP Address Restrictions screen appears.
To add IP addresses to the Inclusion List:
A. Enter 1 for Include Login Restriction IP Address.
B. Enter 1 for Add.
C. Enter the IP address or IP address range you want to add to the Inclusion List. The IP
address or IP address range appears under the IP Address Inclusion List.
Note: You can add or delete as many IP addresses or IP address ranges as you want.
To delete an IP address or IP address range from the Inclusion list:
A. Enter 2.
B. Enter the number associated with the IP address or IP address range you want to delete
and press Enter. The IP address or IP address range is deleted from the Inclusion List.
To add an IP address or IP address range to the Exclusion list:
A. Enter 2 for Exclude Login Restriction IP Address
B. Enter 1 to add an IP address to the Exclusion list.
C. Enter the IP address or IP address range to be added to the Exclusion list. The IP address
or IP address range is added in the IP Address Exclusion List.
D. Press Enter. The IP Address Exclusion List screen appears.
E. Enter n for next. The IP Address Inclusion List and IP Address Exclusion List
appears.
To delete an IP address or IP address range from the Exclusion list:
A. Enter 2 to delete an IP address from the Exclusion list.
B. Enter the number associated with the IP address or IP address range to be deleted.
C. Press Enter. The IP address is deleted from the IP Address Exclusion List.