HP BL860c Installation Manual page 54

2.
To delete a group:
1.
2.
3.
4.
5.
6.
3. Configure Local and Anonymous Access. The following options are available:
Enter 1 to enable Anonymous Access.
CAUTION:
Enter 2 to disable Anonymous Access.
Enter 3 to disable Local Access.
Enter 4 to enable Local Access - Anonymous. Local Access - Anonymous enables you to
locally gain access to HP SMH without authentication. Any local user has access limited to unsecured
pages without being challenged for a username and password.
CAUTION:
software enables it.
Enter 5 to enable Local Access - Administrator. This option grants full access to secure and
unsecure pages. Any user with access to the local console is granted full access.
4. Enter n to go to the next screen or enter p to go to the previous screen.
5. Enter n to go to the next screen. The Trust Mode screen appears.
6. Configure the HP SMH trust mode.
Enter 1 for Trust by Certificate. Trust Mode: Trust by Certificate appears.
The following options are available: Trust by Certificate, Trust by Name, Trust All, and Modify Certificate
List.
Trust by Certificate
1.
2.
54 Installing HP SMH directly on Itanium-based Linux operating systems
3. Press Enter. admin1 appears in the Administrator Group List.
4. Enter n to go to the next screen.
Enter 2 for Operator.
Enter 3 for User.
Enter n to go to the next screen.
Enter 2 to delete a group.
The following options are available:
Enter 1 for Administrator. The Administrator Group List appears.
Enter 2 for Operator. The Operator Group List appears.
Enter 3 for User. The User Group List appears.
At the prompt, enter 1, 2, or 3.
Enter the number next to the group name you want deleted. The group is deleted from the
group list.
Note: You can delete as many groups as you want by repeating this step.
Press Enter when you are finished deleting groups.
Enter n to go to the next screen. The Operating System Groups screen appears.
Enter n to go to the next screen. The User Access screen appears.
HP does not recommend using anonymous access.
HP does not recommend the use of local access unless your management server
Enter 1. You are prompted for the certificate location.
Enter the file path of the trusted certificates to be added to the Trusted Certificates List.
Press Enter when you are finished.
For example: