Pc Health Status - Gigabyte GA-78LMT-S2PV User Manual

2-8

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Hardware Thermal Control
Reset Case Open Status
Case Opened
Vcore
DDR3 1.5V
+12V
+3.3V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
System Smart FAN Control
: Move Enter: Select
F5: Previous Values
& Hardware Thermal Control
Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and
ratio will be reduced when the CPU is overheated. (Default: Enabled)
& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Opened field will
Enabled
show "No" at next boot.
& Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& Current Voltage(V) Vcore/DDR3 1.5V/+12V/+3.3V
Displays the current system voltages.
& Current System/CPU Temperature
Displays current System/CPU temperature.
& Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
& CPU/SYSTEM FAN Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
& CPU/System Smart FAN Control
Enables or disables the fan speed control function. Enabled allows the fan to run at different speed according
to the temperature. You can adjust the fan speed with EasyTune based on system requirements. If disabled,
CPU fan runs at full speed.full speed. (Default: Enabled)
PC Health Status
[Enabled]
[Disabled]
No
1.280V
1.500V
12.168V
3.397V
37 o C
o
37 C
1264 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
C/140
o
- 28 -
Item Help
Menu Level `
ESC: Exit F1: General Help
F7: Optimized Defaults
F, 70 C/158 F, 80 C/176 F, 90
o o o o o
C/194 F.
o o