HP 6125XLG Configuration Manual page 15

Select Network from the navigation tree, click Add on the page that appears, enter For FTP for
Name, 100 for VLAN ID, and 10 for Max. Connections, and click OK.
The network name For FTP is displayed in the Network List page, as shown in
Figure 6 Network List page
c. Define the VSI type of VM 1:
Select VSI Type from the navigation tree. The VSI Type List page appears.
i
Click Add.
ii
On the page that appears, enter VM1 VSI for Name, select For FTP from the Network list,
iii
select the Bandwidth Control and VM Access Control options, enter 172.16.1.0 for Client IP,
0.0.0.255 for Wildcard Mask, select BOTH from the Filtering Direction list, and enter 2048
for CIR (kbps) and 4096 for PIR (kbps).
Click Save and Release.
iv
The VSI type VM1 VSI is displayed in the VSI Type List page, as shown in
Figure 7 VSI Type List page
d. Bind the VSI type VM1 VSI to the vNIC of VM 1 to define the connection:
Select Connection from the navigation tree. The Connection List page appears.
i
Click Add.
ii
iii On the page that appears, enter VM1CON for Name, click Select on the right side of the page, select
the VM1 option from the popup window and click OK (the MAC address 0050-5684-21c7 of VM 1
is displayed in the vNIC field), and then select For FTP from the Network list, VM1 VSI from VSI Type,
and VM1 VSI (V1) from VSI Type Version.
Click OK.
iv
The connection VM1CON is displayed in the Connection List page, as shown in
12
Figure 6.
Figure 7.
Figure 8.