Toshiba B-SX5T SERIES Owner's Manual page 104

APPENDIX 1 MESSAGES AND LEDS
LCD Message
No.
22 SYSTEM ERROR
100BASE LAN
23
INITIALIZING...
24 RFID WRITE ERROR
25 RFID ERROR
NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5
TROUBLESHOOTING for solution.
LED Indication
POWER ONLINE ERROR
When the following abnormal
operations are performed, a system
error occurs:
(a) Command fetch from an odd
(b) Access to word data at an odd
(c) Access to long-word data at an odd
(d) Access to the area of 80000000H to
(e) An undefined instruction in an area
(f) An undefined instruction in a delay
(g) An instruction to rewrite a delay
100 Base LAN Board is being
initialized.
The printer did not succeed in writing
data onto an RFID tag after having
retried for a specified times
The printer cannot communicate with
the RFID module
EA1- 2
Printer Status
address
address
address
FFFFFFFFH in the logic space in
user mode.
other than a delay slot was
decoded.
slot was decoded.
slot was decoded.
ENGLISH VERSION EO1-33059
APPENDIX 1 MESSAGES AND LEDS
Acceptance of
Restoration by
Status Request
RESTART key
Reset Command
Yes/No
No
-----
Yes
Yes
Yes/No
No
-----
Yes
Yes