Technical Information - GE SHOWBIZ Brochure

Technical information

Explanation of codes
Glossary
Operating notes
Health and safety guide
Filament & cap designations
Lamp comparison / construction
Lamp performance
Surge current
Discharge lamps
82
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE
83 - 86
87 - 90
91 - 92
93 - 96
97 - 98
99 - 105
106 - 109
110 - 111
112 - 117
Explanation of codes
Lamps listed in this catalogue are those designed for use as follows:
A1 Prefix - L.I.F. (Lighting Industries Federation) reference indicates lamps which were primarily
designed for use with slide, film and overhead projectors.
ANSI Codes - These are 3-letter codes assigned by the American National Standards Institute. They
provide a system for assuring mechanical and electrical interchangeability among similarly coded
lamps from various manufacturers.
CP Prefix - Lamps designed for use in conjunction with film balanced for 3200K. These are single ended
types intended for use in Fresnel/ellipsoidal luminaires etc.
P2 Prefix - Again for use with 3200K film stock for open faced luminaires and video sun guns.
P1 Prefix - For use with 3400K film stock.
T Prefix - Lamps intended for theatre luminaire applications. These are of lower colour temperature
(2900 - 3050K) and longer life than the often similar CP types above.
C.S.I. - Discharge lamps with a colour temperature of around 4000K for outside broadcast and
follow spot use.
C.I.D. - Discharge lamps with a colour temperature of 5500-6000K for location filming and applications
such as disco lighting where a very bright compact source is required.
83
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE