Table Of Contents - GE SHOWBIZ Brochure

Notes
A Hemispherical shield in front of filament masking all direct light
B Operate at or near horizontal
C Protect from moisture. Safety screening techniques recommended
D Replace broken lamp immediately. Inner bulb pressurised and could shatter unexpectedly
E Use safety screen external to lamp
F Operate BDTH
G Operate BD ±30°
H 100V rating available to order
J 120V rating available to order
K Specially designed for searchlight applications
L Twin filament lamp. Lumen figures relate to single and twin filament options
M Tungsten Halogen minimum bulb wall temp 250°C
N 3 or 4 amp HBC fuse necessary
P 5 or 6 amp HBC fuse necessary
Q 6 or 7 amp HBC fuse necessary
R 10 amp HBC fuse necessary
S Due to internal integral reflector nominal lumens not shown
T Obscured top
V Due to integral dichroic reflector nominal lumens not shown
W Axial coiled coil single ended lamps will generally give better reliability against premature
arcing if orientations in which the main support spine is under the filament are avoided
Contents
Symbols 2 - 3
PAR Lamps 4 - 17
Single Ended Halogen Lamps 18 - 35
Linear Halogen Lamps 36 - 43
Specialist Projector Lamps 44 - 61
Discharge Lamps 62 - 81
Technical Information 82 - 117
Index 118 - 141
GE Lighting World Addresses 142 - 148
1
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE