Installing The Drivers; Setting Up Your Docking Station - Asus HZ-1 User Manual

Installing your HZ-1 USB 3.0 docking station

Installing the drivers

1. Place the Dri�er CD into your computer's optical dri�e.
2. Click Setup.exe.
3. Select your language and click I Accept.
4. Wait until the dri�ers are installed successfully in your computer.
• It is normal if your computer screen goes black or flashes temporarily during the driver
installation process.
• Ensure that you install the dri�er before connecting the docking station to your computer.

Setting up your docking station

To set up your docking station:
1. Connect one end of the bundled power
adapter to the DC �N port on your
docking station and the other end to a
100-240V AC power outlet.
Use only the bundled power
adapter. Using other power
adapters may damage your
de�ice.
2. Connect the square end of the bundled
USB 3.0 cable to the USB 3.0 upstream
port on your docking station and the
other end to your computer's USB 3.0
port.
HZ-1 USB 3.0 Docking Station User Guide
2
1
9