Table of Contents
Advertisement
IV. Microsoft Windows NT
Video Driver Installation
Installing ASUS S3 series Display Drivers for Windows NT 4.0
After installing your graphics card, Windows NT will default to stan-
dard VGA mode (640 x 480, 16 colors). The procedure below de-
scribes how you install ASUS S3 series display driver for Windows
NT.
1. Boot Windows NT in standard VGA mode (recommended).
2. Run Windows NT Display program located in the Control Panel,
under Settings in the Start menu. Alternatively, position the
cursor on the background of the desktop, click the right mouse
button, then select Properties from the popup menu.
3. Select the Settings page.
4. Select Display Type...
5. Select Change... from the display options.
6. Select Have Disk...
7. Windows NT will prompt you for the correct path, enter the
path of driver in CD-ROM such as D:\NT40 (assuming your
CD-ROM drive is letter D).
8. A list of ASUS S3 series video adapters will be displayed. Se-
lect the one you are using, then click on the OK button.
9. Windows NT will once again prompt for confirmation. All ap-
propriate files are then copied to the hard disk.
10. Select Apply in Control Panel. Restart Windows NT. Win-
dows NT will start up using the S3 drivers.
11. Windows NT will boot into a default mode and start the Display
applet allowing for mode selection.
ASUS PCI-V775V2C User's Manual
21
Advertisement
Table of Contents
