Table of Contents
Advertisement
MAINTENANCE
1. Turn off the power switch in the rear of the unit.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before use.
7. The air filter needs to be cleaned every 3 months. Please remove the filter as shown in
the following steps. Flush and clean the filter with water, then dry it out and re-install.
The unit
8. If the unit is not in use for a long time, please take out the battery in the remote control
according to following steps, then take care of the remote control.
Remote control
Battery cover
PULL
PUSH
9
Air filter
Fixing panel
Fixing screws
Battery
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Heat Pure 1500 and is the answer not in the manual?
Questions and answers
My heater has the power light on. Will turn on but shuts itself off right away Did it 3 times this morning it is cold in this room so I **** sure it is not 68 which I set it at. Really like the heater would like to know how to fix it. Only used rarely. So when super cold in office.
The Intertek Heat Pure 1500 heater may turn on but shut off immediately if its internal components reach a temperature that could cause overheating and a potential fire. The heater has an automatic safety feature that shuts it off in such conditions to prevent hazards.
This answer is automatically generated
@Amy Bowe I had the same problem but figured out that my **** wasn’t turning on. I removed the back and cleaned everything out. The thin filter doesn’t really do a great job and I found a lot of buildup on the ****. I didn’t actually use any cleaner, just compressed air, lightly scraping and a vacuum seemed to do the trick. Mine works great now. PS make sure to unplug the heater before doing this!!!
Knob will not turn
Parts for Model LS21-2W-PW1QT Intertek Electric Infrared Heater
The remote will not work even with new batteries
The Intertek Heat Pure 1500 remote may not be working with new batteries due to the electro lock feature being activated. If the control panel and remote control are unresponsive, the electro lock may be engaged. To release the lock, press the Temp Up and Temp Down buttons simultaneously for 3 seconds until a buzzer rings and the lock indication disappears. If the issue persists, ensure the batteries are correctly installed and functional.
This answer is automatically generated