Table of Contents
Advertisement
Or
4、Setting the timer to Power-Off the heater
Attention! ONLY when the power is on, can you set the timer power-off function.
Or
5、Setting the timer to Power On the heater
Attention! ONLY when the power is off, can you set the timer power-on function.
Or
5、Setting electro lock
Function of electro lock can avoid mis-operation from children. Locking can be set in both
power-on and power-off modes.
And
And
Press the air purification button again either on the control
panel or remote controller to stop the air purification.
When starting the unit, press the timer button on the
control panel.
Digital display turns the set temperature to the time value
for the timer. Press the timer button more than once, the
value will vary from 0 to 12hr (1 hr interval) in circulation.
The light is on when the timer power-off mode is set.
Under power-off, press the timer button on the control
panel.
Digital display indicates the time value for the timer. Press
the timer button more than once, the value will vary from 0
to 12hr (1 hr interval) in circulation.
The light is on when the timer power-on mode is set.
Press Temp Up and Temp Down buttons once for 3
seconds. Locking is fulfilled when a buzzer rings. When
locked, control panel and remote control will fail to
function.
When release is needed, please re-press Temp Up and
Temp Down buttons once for 3 seconds. Release is fulfilled
when a buzzer rings. Lock indication disappears. Control
panel and remote control return to function.
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Heat Pure 1500 and is the answer not in the manual?
Questions and answers
My heater has the power light on. Will turn on but shuts itself off right away Did it 3 times this morning it is cold in this room so I **** sure it is not 68 which I set it at. Really like the heater would like to know how to fix it. Only used rarely. So when super cold in office.
The Intertek Heat Pure 1500 heater may turn on but shut off immediately if its internal components reach a temperature that could cause overheating and a potential fire. The heater has an automatic safety feature that shuts it off in such conditions to prevent hazards.
This answer is automatically generated
@Amy Bowe I had the same problem but figured out that my **** wasn’t turning on. I removed the back and cleaned everything out. The thin filter doesn’t really do a great job and I found a lot of buildup on the ****. I didn’t actually use any cleaner, just compressed air, lightly scraping and a vacuum seemed to do the trick. Mine works great now. PS make sure to unplug the heater before doing this!!!
Knob will not turn
Parts for Model LS21-2W-PW1QT Intertek Electric Infrared Heater
The remote will not work even with new batteries
The Intertek Heat Pure 1500 remote may not be working with new batteries due to the electro lock feature being activated. If the control panel and remote control are unresponsive, the electro lock may be engaged. To release the lock, press the Temp Up and Temp Down buttons simultaneously for 3 seconds until a buzzer rings and the lock indication disappears. If the issue persists, ensure the batteries are correctly installed and functional.
This answer is automatically generated