Table of Contents
Advertisement
WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit
between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting
the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for
damage.
IN THE BOX
·INFRARED ZONE HEATING SYSTEM
·REMOTE CONTROL
·REMOTE CONTROL BATTERY
·INSTRUCTION BOOKLET
PRODUCT DIAGRAM
WARNING: This heater has a voltage rating of
120 volts. The cord has a plug as shown in A. An
adapter as shown in C is available for connecting
three-blade grounding-type plugs to two-slot
receptacles. The grounding lug extending from the
adapter must be connected to a permanent ground
such as a properly grounded outlet box. The
adapter should not be used if a three-slot grounded
receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE OF
THE GROUNDED PLUG.
Plastic Cabinet
Air Outlet
Front Panel
Control Panel
Wheel
Remote Control
4
Air Intake
Cord Clamp
Power Switch
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Heat Pure 1500 and is the answer not in the manual?
Questions and answers
My heater has the power light on. Will turn on but shuts itself off right away Did it 3 times this morning it is cold in this room so I **** sure it is not 68 which I set it at. Really like the heater would like to know how to fix it. Only used rarely. So when super cold in office.
The Intertek Heat Pure 1500 heater may turn on but shut off immediately if its internal components reach a temperature that could cause overheating and a potential fire. The heater has an automatic safety feature that shuts it off in such conditions to prevent hazards.
This answer is automatically generated
@Amy Bowe I had the same problem but figured out that my **** wasn’t turning on. I removed the back and cleaned everything out. The thin filter doesn’t really do a great job and I found a lot of buildup on the ****. I didn’t actually use any cleaner, just compressed air, lightly scraping and a vacuum seemed to do the trick. Mine works great now. PS make sure to unplug the heater before doing this!!!
Knob will not turn
Parts for Model LS21-2W-PW1QT Intertek Electric Infrared Heater
The remote will not work even with new batteries
The Intertek Heat Pure 1500 remote may not be working with new batteries due to the electro lock feature being activated. If the control panel and remote control are unresponsive, the electro lock may be engaged. To release the lock, press the Temp Up and Temp Down buttons simultaneously for 3 seconds until a buzzer rings and the lock indication disappears. If the issue persists, ensure the batteries are correctly installed and functional.
This answer is automatically generated