Installation; Operation; Record Directly To The Pc From The Docking Station; Recharge The Batteries Of The Digital Pocket Memo - Philips LFH9120 User Manual

2

Installation

Connect the Philips power supply to the main power supply.
1
Connect the docking station to the Philips power supply.
2
Connect the docking station to a free USB socket using the supplied USB cable.
3


Operation

3.1

Record directly to the PC from the docking station

Start the recording application on your PC.
1
Make sure that the docking station is connected to the PC with the USB cable.
2
Switch on the Digital Pocket Memo and insert it into the docking slot of the docking station
3
and press it down firmly until it locks.
When in the docking station, the Digital Pocket Memo operates like a USB microphone, and
4
records directly to the PC.
3.2

Recharge the batteries of the Digital Pocket Memo

Make sure that the docking station is connected to the main power supply with the Philips
1
power supply.
Insert the Digital Pocket Memo into the docking slot of the docking station and press it down
2
firmly until it locks. The green LED lights up, indicating that the batteries of the Digital Pocket
Memo are being recharged in fast recharge mode.
Use the Digital Pocket Memo from the docking station, or switch it off when not being used.
3
When the green LED blinks, recharging is complete and you can remove the Digital Pocket
4
Memo from the docking slot.
D Note: The Digital Pocket Memo can become warm during fast recharging.
User manual