In the Security Options section of the Wireless Settings screen, leave the default setting
1.
or
select one of the WPA settings:
FINALAN0AS
WPA-PSK. This setting provides the TKIP encryption type and a pre-shared key
•
passphrase.
WPA2-PSK. This setting provides the AES encryption type and a pre-shared key
•
passphrase.
Depending on the WPA settings that you select, enter the required information.
2.
For WPA-PSK or WPA2-PSK, enter the pre-shared key, which is a passphrase between
8 and 63 characters. This product comes with a preconfigured WPA passphrase.
Click Apply to save your settings.
3.
Configure your wireless computers with the same WPA2 or WPA settings as your gateway
4.
so that you will be able to connect.
NETGEAR Wireless Cable Gateway CG3000
Wireless Configuration
14