Quick Start Steps; Terminal Installation - Lathem FaceIN FR700 User Manual

Quick Start Steps

Terminal Installation

1
Separate the mounting-plate
from the FaceIN terminal by
removing the Philips head
screws. Retain the screws for
later. (See page 8 for more
details.)
3
Plug the RJ45 network cable
into the Ethernet port and the
Power Adapter plug into the
Power Adapter port which is
located in the compartment on
back of the terminal.
Verify the contents of your system. (For more detailed
information turn to page 6.)
2
Install the mounting-plate to the
wall using the supplied wall-
mount screws. Note: For best
visibility mount the terminal for
the shortest employee, taller
employees can bend down.
4
Align the FaceIN terminal with
the pins on the mounting-plate
and secure the two together with
the 2 Philip head screws. Be
careful not to pinch the AC cord.
When finished, plug the Power
Adapter into an AC wall outlet.