Facein Terminal Startup - Lathem FaceIN FR700 User Manual

P A Y C L O C K

FaceIN Terminal Startup

After completing the installation and power-up, the terminal will
display the normal screen with the date, day of week and time.
You are now ready to set up the network communications and define
the initial administrator. Note: You must set up at least one
administrator.
Set up the Network Communications
The FaceIN terminal must be configured to communicate with the
PayClock software over the network. You may have to contact your
network administrator if you are unsure how to set up the network
communications.
• Press the MENU key, the Functions Menu will open.
• Press 4, the System Setting menu will open.
• From the System Setting menu, press 2 - Set Network.
• Enter the IP Address for the terminal and press OK.
• Enter the Mask Code and press OK.
• Enter the Gateway Address and press OK.
• The FaceIN terminal will restart automatically.
Note: You may have to enter leading zeros when entering the
addresses. For example, the address 10.0.0.1 would be entered as
010.000.000.001 at the terminal.
& F A C E I N
10
U S E R ' S G U I D E