Toshiba Satellite Pro S850 Series User Manual page 154

Problem
eSATA device does
not work
Additional memory module
Please also refer to Chapter 3,
installing and removing memory modules.
Problem
An error will occur if
a memory module is
inserted into Slot B
while no memory
module is inserted in
Slot A.
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
User's Manual
Procedure
Remove the eSATA device from the computer and
then reconnect it to a free port it in order to ensure
it is firmly attached.
A connected eSATA device may not be recognized
if it is connected to the computer's eSATA/USB
combo port while the computer is in Sleep Mode or
Hibernation Mode. If this occurs, disconnect the
eSATA device and then reconnect the device while
the computer is turned on.
Ensure that any required eSATA device drivers are
properly installed - to achieve this you should refer
to both the device documentation and the
operating system documentation.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Operating Basics, for further information on
Procedure
Remove the memory module from Slot B and
insert it into Slot A.
6-15