Using The Hard Disk Drive (Hdd) Protection; Toshiba Hdd Protection Properties - Toshiba Satellite Pro S850 Series User Manual

8.
9.

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on the hard
disk drive.
Using an acceleration sensor built into the computer, TOSHIBA HDD
Protection detects vibration shocks and similar signs of movement of the
computer, and automatically moves the Hard Disk Drive head to a safe
position to reduce the risk of damage that could be caused by head-to-disk
contact.
When vibration is detected, a message will be displayed on the screen, and
the icon in the Taskbar notification area will change to the protection state.
This message is displayed until the OK button is pressed or 30 seconds
pass. When vibration subsides, the icon returns to the normal state.
Taskbar icon
Normal
Protection
OFF

TOSHIBA HDD Protection Properties

You can change the TOSHIBA HDD Protection settings by using the
TOSHIBA HDD Protection Properties window. To open the window, click
Start -> All Programs -> TOSHIBA -> Tools & Utilities -> HDD
Protection. The window can also be started from the icon on the Taskbar
or from the Control Panel.
HDD Protection
You can choose whether to enable or disable TOSHIBA HDD Protection.
User's Manual
Install the battery pack (refer to the
in chapter 5, Power and Power-Up Modes, if required).
Turn your computer over.
The TOSHIBA HDD Protection function does not guarantee that the
hard disk drive will not be damaged.
During audio/video playback, when the computer detects a shock or
vibration and the hard disk drive's head is parked, the playback might
be temporarily interrupted.
TOSHIBA HDD Protection cannot be used in models that are
equipped with SSD.
Replacing the battery pack
TOSHIBA HDD Protection is enabled.
TOSHIBA HDD Protection is active. The hard
disk drive head is in a safe position.
TOSHIBA HDD Protection is disabled.
section
4-26