English; Basic Operations By Using The Remote Control; Using The Shutter/ Av Mute Button; Switching The Input Signal - Panasonic PT-EX500U Operating Instructions Manual

Basic operations by using the remote control

Using the SHUTTER/ AV
MUTE button
* <SHUTTER> button
Only for EZ570 series, EW630 series and
EX600 series
This function allows you allows you to completely
block out light to the screen.
button
Press the <SHUTTER
remote control.
Note
For details, see "Setting" of Main menu. (
z
* <AV MUTE> button
Only for EW530 series and EX500 series
button
Press the <AV MUTE
remote control.
Press the < AV MUTE> button on the remote control
to black out the image. To restore to normal, press the
< AV MUTE> button again or press any button.
black out
> button on the
*
Æ page 68)
> button on the
*
projected image
Note
When use the <MUTE> button to release the [
z
function, the mute function cannot be operated at the
same time.

Switching the input signal

You can switch the input signals to project.
Press the <INPUT> button or the
<INPUT 1>/<INPUT 2>/<INPUT 3> button
on the remote control.
The input source changes each time you press the
<INPUT> button as follows:
Input 1 --> Input 2 --> Input 3 --> ...
The input source changes each time you press the
<INPUT 1>/<INPUT 2>/<INPUT 3> button as follows:
INPUT 1 button
Input 1
RGB(PC analog)
RGB (Scart)
DVI-D
DVI-D(HDCP)
HDMI
Note
Whether the input search function is available or not
z
after you pressed the <INPUT> button, it depends on the
setting of the [Input button] in the Setting menu.
( Æ page 62)
AV mute]
buttons
INPUT 2 button
Input 2
Video
Y,Pb/Cb,Pr/Cr
RGB
INPUT 3 button
Input 3
Video
Y,Pb/Cb,Pr/Cr
S-video

ENGLISH -

41