Yamaha F4B Owner's Manual page 46

Operation
1
1. Cooling water inlet
EMU39583
Procedure for shallow water cruising
1. Move the gear shift lever to the neutral
position.
1. Neutral position
2. Hold the rear of the top cowling and
slightly tilt the outboard motor up until the
tilt support bar automatically locks. The
outboard motor can be operated in this
position for shallow water cruising. The
outboard motor is equipped with 3 shal-
low water cruising positions.
41
ZMU06819
1
ZMU06749
1. Shallow water cruising position
2. Tilt support bar
EMU40041
Procedure for returning to normal cruising
1. To tilt the outboard motor down to the
normal running position, move the gear
shift lever to the neutral position.
1. Neutral position
2. Slightly tilt the outboard motor up, and
then slowly tilt the outboard motor down
while pulling the tilt support bar up.
1
1. Tilt support bar
2
1
ZMU06760
1
ZMU06749
ZMU06881