Kitchen Timer Mode - Emerson MW8987B Owner's Manual And Cooking Manual

KITCHEN TIMER MODE

KITCHEN TIMER operates as a minute timer, can be set to delay cooking and used to set a holding time after cooking.
However delay cooking can not be programmed for defrost. KITCHEN TIMER operates without microwave energy.
HOW TO USE AS A MINUTE TIMER
1. Touch KITCHEN TIMER pad.
KITCHEN
TIMER
2. Press the amount of time you want to count down.
3. Touch START pad.
The Timer indicator starts blinking and the display counts down the time remaining in KITCHEN TIMER mode.
When KITCHEN TIMER mode ends, you will hear 3 beeps.
HOW TO DELAY THE START OF COOKING
1. Touch KITCHEN TIMER pad.
KITCHEN
TIMER
2. Press the amount of time you want to delay.
3. Program the desired power level and cooking time for
food to be cooked.
4. Touch START pad.
When you touch START pad, the Timer indicator starts blinking and the display counts down the time
remaining in KITCHEN TIMER mode. When KITCHEN TIMER mode ends, the oven will beep. The Timer
indicator goes off and M/W indicator starts blinking. The display counts down the time remaining in M/W
mode. When M/W cook ends, you will hear 3 beeps.
HOW TO SET HOLDING TIME
1. Program the desired cooking time.
KITCHEN
2. Touch KITCHEN TIMER pad.
TIMER
3. Press the amount of time you want the oven to hold.
4. Touch START pad.
The M/W indicator starts blinking and the display counts down the time remaining in M/W mode. When the
M/W cook ends, the oven will beep. The M/W indicator goes off and Timer indicator starts blinking. The
display counts down the time remaining in KITCHEN TIMER mode. When the KITCHEN TIMER mode
ends, you will hear 3 beeps.
Note : Your oven can be programmed for 59 minutes 99 seconds. ( 59 : 99 )
15
The Timer indicator lights and " : 0" is
displayed.
The display will show what you touched.
The Timer indicator lights and " : 0 " is
displayed.
The display will show what you touched.
The M/W indicator lights and the selected
power level & cooking time are displayed.
The M/W indicator lights and the selected time
is displayed.
The Timer indicator lights and " : 0" is
displayed.
The display will show what you touched.