Pyle PLVCP Operating Instructions Manual page 31

Table of Contents

Advertisement

SYMPTOMS
No backlighting at power button.
Power indicated with backlighting-
unit will not operate.
More indicators flashing unit will not operate.
PLAY mode indicated no audio or
video to TV.
CAUSE
• No 12V DC.
• Check circuit fuse at source of power
(see vehicle/converter manual).
• In-line fuse of power cord (in lighter plug).
• VCP (2 amp* 20X 5mm) fuse located on
rear of unit.
• Power cord unplugged from 12V outlet or
at rear of unit.
• (Unit in dew mode) Dew
• Retain power to player and allow unit for
feature activated (see
a time to get rid of moisture. (After 30
owner's manual).
minutes if dew indicator is still on,
completely switch power off from unit and
resupply after a minute. This can reset
dew indicator if moisture eliminated.)
• No tape in unit.
• Insert the tape.
• Low voltage.
• Start the vehicle, if not running.
• Unit in emergency mode.
• Contact dealer for service to player.
• VCP connected to A/V Input
• Switch TV to video mode with remote
jack, RCA patch cables set in
control or switch behind control door of
TV mode.
TV.
27
POSSIBLE SOLUTIONS

Advertisement

Table of Contents
loading

Table of Contents