Pyle PLVCP Operating Instructions Manual page 18

IDENTIFICATION (continued)
REMOTE CONTROL OPERATION RANGE
7m
o
30
1. Any object between the remote control and VCP will block the
path of beam when it is being used.
Dark walls, direct sunshine or very bright (incandescent) light
will reduce the remote control sensitivity.
2. Hold the remote control within an angle range of about 30º
from either side of the remote sensor center as shown.
3. When the remote control is vertical to the remote Sensor, it will
work within about 23feet (7m) from the VCP.
o
30
4. Point the front of the remote control directly at the front of the
VCP.
14