Before Calling Service Personnel - Pyle PLVCP Operating Instructions Manual

BEFORE CALLING SERVICE PERSONNEL

Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment on your
part may eliminate the trouble.
SYMPTOMS
here is no power to the VCP.
T
Noise bars on screen.
Operation key does not work.
Cassette is ejected upon inserting.
Audio output does not change to Hi-Fi
mode.
CAUSE
• The power cord is not connected.
• The polarity of power cord is not
correct.
• Tracking is not adjusted.
• If the cassette or the VCP is not in
normal condition, every indicator
LED/LAMP lights up and the VCP
does not work.
• Safety device works to protect the
cassette when it is inserted
incorrectly.
• The cassette is recorded in mono
VCR.
• The first autotracking is executing
until now.
26
POSSIBLE SOLUTIONS
• Check the power cord.
• Change the polarity of power cord.
• Adjust the picture to be clear by
pressing the PLAY key.
• Turn off the power and turn on the
power again by pressing the
POWER cord.
• Unplug and replug the power cord.
• Pull the cassette out (unloading)
and insert it firmly into the cassette
compartment.
• The cassette can not be playback in
Hi-Fi mode.
• Wait for a second.