BASIC OPERATION
CASSETTE LOADING/UNLOADING
LOADING
Œ Push the cassette into the cassette compartment
gently. (Arrow mark at the top)
• An inverted cassette cannot be inserted.
´ The cassette-in indicator lamp is lit up.
• Upon inserting the cassette, the power turns on even if the
power was off as long as the DC power cord is plugged in.
UNLOADING
Œ Press the STOP/EJECT key twice on the VCP (in the
PLAYBACK mode). This first press will stop the tape.
The second press will eject the tape. The cassette-in
indicator lamp will be lit out.
´ Pull the cassette out gently.
• When you press the STOP/EJECT key even if the
power is off, the cassette will be ejected.
20