Declaration Of Conformity; Lan, Parallel And Serial Interface Output Voltage - Ricoh DDP 184 User Manual

Declaration of Conformity

This equipment has been tested and found to comply with the limits for a class A
Information Technology Equipment in accordance with the European Standard
EN55022.
These limits are designed to provide reasonable protection against unacceptable
interference in either commercial or industrial environments. This equipment
generates, uses, and can radiate radio signals and if it is not installed and used in
accordance with the instructions detailed in this user's guide, it may cause unacceptable
interference to radio communication installations and equipment. The operation of this
equipment in a residential area is likely to cause unacceptable interference in which
case you may be required to correct the source of the interference at your own expense.
In order to maintain compliance to the class A regulations, shielded cables must be used
with this equipment. Operation of this equipment without shielded cables is likely to
cause interference to radio and television receivers thereby degrading their reception.
Please be aware that changes and modifications made to the equipment without prior
approval of the manufacturer could negate your permission to operate the equipment.

LAN, Parallel and Serial Interface Output Voltage

A-4 Safety Information
Ricoh Printing Systems America, Inc.
2635-A Park Center Drive, Simi Valley, CA 93065-6209, (805) 578 – 4000, FAX (805) 578 - 4005
DECLARATION OF CONFORMITY
Ricoh Printing Systems America, Inc., 2635-A Park Center Drive, Simi Valley, California 93065 declares that the following products:
Laser Printer + Finisher + Finisher(Booklet Maker) + High Capacity Feeder + Publishing Finisher + Container Stacker Models:
DDP184 (LB184ADP1) + FS108H + FS108HBM + HCF + PF + CS
conforms to the following directives and standards:
Emission:
I. EMC Directive 89/336/EEC, 92/31/EEC
Immunity:
II. Low Voltage Directive 73/23/EEC incl. Amendments:
III. CE Marking Directive 93/68/EEC
The company named above (or Ricoh Printing Systems, Ltd., 1060 Takeda Hitachinaka City Ibaraki Pref. 312-8502, Japan) will keep on file
for review the following technical documentation:
·
Machine safety for EN60950 VDE license no. 121130.
·
EMC Test Report No. T3J033123 (Tokin)
·
ISO9001 Certificate of Approval BVQI Certificate No. 58603 (66783, Japan)
·
Operator's Guide No. N905300
Importers/Distributors in Europe:
Nicholas H. Tew
1. Ricoh Printing Systems Europe, Clonshaugh Industrial Estate, Dublin 17, Ireland, Mr. Charles Putney
2. EXEL, Hoeksteen 26, Hoffddorp, P.O. Box 75603, Netherlands 1118ZR, Schiphol, Mr. Adrian Channing
Jefferson Talbott (Vice President, Engineering)
Simi Valley, November 12, 2004
Interface
10/100B-T Aux
Parallel
Serial
EN55022 (Class A) / 1998
EN61000-3-2:1995/A1:1998/A2:1998
EN61000-3-3 / 1995
EN55024 / 1998
IEC61000-4-2 / 1995/A1:1998
IEC61000-4-3 / 1995/A1:1998
IEC61000-4-4 / 1995/A1:2000
IEC61000-4-5 / 1995/A1:2000
IEC61000-4-6 / 1996/A1:2000
IEC61000-4-8:1993/A1:2000
IEC61000-4-11:1994/A1:2000
EN60950:1992+A1:1993+A2:1993+A3:1995+
A4:1997+A11:1997
EN60825-1:1994+A11:1996
Nicholas H. Tew(Product Safety/EMC Engineer)
Output Voltage
2.2v - 2.8v
Shall not exceed 5.5v
-14.3 - +14.3