PARTS AND FEATURES
The parts and features of your washer are illustrated on this page.
Become familiar with all parts and features before using your washer.
NOTE
• The drawings in this book may vary from your washer model.
They are designed to show the different features of all models covered by this book,
Your model may not include all features.
• HOT WATER TAP
After using the washer, close the water tap.
In case of the single valve model,
there is no hot water valve.
• SOFTENER INLET
• BLEACH INLET
• CONTROL PANEL
• POWER SWITCH
• PULSATOR
• ADJUSTABLE LEG
ACCESSORIES
DRYTEN (OPTION)
DRYTEN
HOSE DRAIN (FOR PUMP)
COVER UNDER (OPTION)
HOSE DRAIN CLAMP
HOSE DRAIN (FOR NON- PUMP) CONNECTOR INLET(OPTION)
2
WATER TAP ADAPTER
• COLD WATER TAP
After using the washer,
close the water tap
• DETERGENT CASE
• LINT FILTER
• GROUND WIRE
In case of 3-wire
power cord, ground
wire will not be
provided
• POWER CORD
• HOSE DRAIN
INLET HOSE