How To Clean The Filter - Daewoo DWF-173M Instruction Manual

HOW TO CLEAN THE FILTER

Cleaning the Lint Filter
! Pull the Fiter frame up-
ward.
Cleaning the water inlet filter
• Clean the filter when water leaks from, the water inlet.
! Pull the power
plug out before
cleaning it.
Cleaning the drain filter
• In case "Pump-Model" drain hose, this filter's equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
! Put down the remained
water in the hose. And
put a container under the
filter to collect water.
CONTAINER
FILTER
$ Clean the drain filter.
CAP
@ Turn the lint filter inside
out, wash to the lint off
with water
Lint Filter
@ Turn off the water
supply to the
washer and
sperate the inlet
hose.
@ Turn the cap counter
clockwise.
% Put in the filter along the
guiding prominence of
the case. Please note the
left position of the filter
adjusting the groove to
the guide rib.
FILTER
CAP
13
# Return the filter as it was,
and insert the filter frame
into the slot
Filter Frame
# Pull the inlet filter
out.
# Pull out the filter
assembly.
CAP
CAP
^ Turn the cap clockwise
tightly.
CASE
GUIDE
RIB
SUIT
$ Remove the dirt
from the inlet
filter with a brush.
FILTER
CASE
CAP