Dell W1900 Owner's Manual page 30

FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm
Setting Your Cable Channels
Your TV is set to automatically detect whether you are using an antenna or cable and then set the
available channels. Some cable providers use an older cable standard that the TV can not
automatically detect. If you have your TV connected but can only view channels 5 and 6, complete
the following steps:
Press the Menu button the remote control or TV and enter the on-screen display (OSD).
1
Select Setup and then select Channel Setup.
2
In Channel Setup, select Antenna/Cable, and then toggle to Cable.
3
If selecting Cable does not resolve the issue, repeat steps 1 through step 3 using each available
4
Channel Setup option (HRC, IRC, and Antenna) until you can view all channels.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 2 / 0 4 – F O R P R O O F O N LY
30
Using the On-Screen Display