Selecting Your Osd Language; Input Select Menu - Dell W1900 Owner's Manual

FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm

Selecting Your OSD Language

Press Menu to enter the OSD.
1
Select Setup.
2
In the Setup menu, select Language and select the language that you want the OSD to
3
appear in.

Input Select Menu

The Input Select menu allows you to select the proper source based on how you have your TV
display and video equipment connected. Press Input on the remote to go directly to the Input
Select menu. You can also press Menu and select Input Select from the main menu.
IN PU T S EL EC T
EXIT
VGA
DVI
TV
AV1 (COMPOSITE)
AV2 (S-VIDEO)
AV3 (COMPONENT 1)
AV4 (COMPONENT 2)
SHOW INPUTS
AV2 (S -VI DEO ) — Select when you have a video device, such as a VCR, connected to the S-Video
connector on the side of the TV display. See "Left Side View" on page 7 for the location of the S-Video
connector.
AV3 (COMPONENT 1) — Select when you have a video device, such as a DVD player, connected to the
component connector. See "Bottom View" on page 8 for the location of the component connector.
AV4 (COMPONENT 2) — Select when you have a video device, such as a DVD player, connected to the
component connector. See "Bottom View" on page 8 for the location of the component connector.
SHOW INPUTS — Show Inputs allows you to select Active or All. Active searches for which connectors
are being used. The available input sources appear in white and input sources that are not available appear
in grey. All shows all the input sources and allows you to select all the input sources even if you do not have
a device connected.
NOTE:
In OSD Settings, located in the Setup menu, you can set the Input Select to display the device
that you have attached. For example, AV2 would say DVD when you view the Input Select menu.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 2 / 0 4 – F O R P R O O F O N LY
24
Using the On-Screen Display
VGA — Select when your TV display is being used as a
computer monitor and you have connected the computer
using a VGA cable. See "Bottom View" on page 8 for the
location of the VGA connector.
DV I — Select when your TV display is being used as a
computer monitor and you have connected the computer
or when you have connected a device, such as a DVD
player using the DVI cable. See "Bottom View" on page 8
for the location of the DVI connector.
TV — Select when you have your antenna or cable TV
box connected to the ANT/Cable connector. See "Bottom
View" on page 8 for the location of the coaxial connector.
AV1 (C O M PO SI TE) — Select when you have a video
device, such as a video game system, connected to the
composite connector on the side of the TV display. See
ALL
"Left Side View" on page 7 for the location of the
composite connector.