Peripherals - Gigabyte GA-H61M-WW User Manual

2-5

Peripherals

& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode.
Configures the SATA controller to IDE mode. (Default)
IDE
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI)
AHCI
is an interface specification that allows the storage driver to enable advanced Serial ATA
features such as Native Command Queuing and hot plug.
& USB2.0 Controller
Enables or disables the integrated USB 2.0/1.1 controller. (Default: Enabled)
& Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics
card or the onboard graphics.
Lets BIOS automatically configure this setting. (Default)
Auto
Sets the onboard graphics as the first display.
IGFX
Sets the PCI Express graphics card on the PCIEX16 slot as the first display.
PEG
Sets the PCI graphics card as the first display.
PCI
& Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto)
& Internal Graphics Memory Size
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
& DVMT Total Memory Size
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
- 25 -