Toshiba 32PX200 series Owner's Manual page 40

Wireless Information
The settings confi gured in Wireless Setup can be
confi rmed.
1
Press QUICK to open the Quick Menu.
2
Press  or  to select Wireless Information
and press OK.
Quick Menu
Picture Mode
Picture Size
Toshiba Places
USB Media Player
Network Media Player
Sleep Timer
Signal Booster
Speakers
Wireless Information
• When the Network Type is Wireless, a
Wireless Information window will appear.
Note:
Press the RED button to scan for all APs.
40
Connecting your TV
Standard
Super live
00:00
Off
TV Speakers
Item
Status Connected is displayed when
the TV is connected with the AP.
Disconnected is displayed
when the TV is not connected
with the AP.
Signal Connection signal strength with
AP (STRONG/MEDIUM/WEAK)
Speed Link with AP
Mode Working mode (11a, 11b, 11g,
11n)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC The AP's MAC address is
Address displayed when the TV is
connected with the AP.
TV MAC The MAC address of the USB
Address (Dual Band WLAN Adaptor) is
displayed.
DHCP Enabled is displayed when
using DHCP.
Disabled is displayed when not
using DHCP.
IP Address The TV's IP address
Subnet Mask Value of the Subnet Mask
Default Address of the Default GATEWAY
Gateway
DNS Address of the DNS
Note:
Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value
might below. It is recommended that Encryption be
changed to AES (see "Manual Setup" - page 39).
Notes on wireless LAN environment:
• The function of all IEEE 802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or
IEEE 802.11n on 5 GHz for audio and SD video
streaming.
• It is recommended to use IEEE 802.11n on 5 GHz
for HD video streaming.
• It is recommended that the encoding rate for
streaming video content is 20 Mbps or less.
Description