Introduction / Getting Started; Pedestal Stand Assembling - Toshiba 32PX200 series Owner's Manual

Pedestal stand Assembling

32PX200 Series / 40PX200 Series models
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a fl at,
cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the
surface and assemble as indicated.
Note:
Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
1
2
M4 × 4
3
M5 × 3

Introduction / Getting started

M6 mm
4
5
Warning: Ensure the power cable is not pinched
when attaching the pedestal stand as this could
cause an electric shock.
M5 × 4
3