Using Your Home Network - Toshiba 32PX200 series Owner's Manual

To connect the TV to a home network - Wireless
(except for PX200EE/E5/V5 models)
To connect to a wireless network, use a TOSHIBA
Dual Band WLAN Adaptor (not supplied).
Please refer to "Setting up the Network" section.
Access point (AP)
Wireless LAN router
Modem
PC
How to use this Dual Band Wireless LAN Adaptor
• If this device is going to be operated in the
frequency range of 5.15 GHz to 5.35 GHz, it is
restricted to indoor use.

Using your home network

This TV is a DLNA CERTIFIED™ Player. This TV can
play digital content stored on a DLNA CERTIFIED™
product with server function.
If you want to use this TV as a DLNA CERTIFIED™
Player, you will have to confi gure the network on
your TV.
If you want to use your home network, you will have
to confi gure the network on your TV.
Change the network settings if necessary.
When using a wireless network
(except for PX200EE/E5/V5 models)
Wireless Interoperability
The TOSHIBA Dual Band WLAN Adaptor is designed
to be interoperable with any wireless LAN product
that is based on Direct Sequence Spread Spectrum
(DSSS)/Orthogonal Frequency Division Multiplexing
(OFDM) radio technology, and is compliant to:
• The IEEE 802.11 Standard on Wireless LANs
(Revision a/b/g/n), as defi ned and approved
by the Institute of Electrical and Electronics
Engineers.
• The TOSHIBA Dual Band WLAN Adaptor is
intended for use this TV and should not be used
with any other devices.
Connecting your TV
Left side view
TOSHIBA Dual Band
WLAN adaptor
• Use of the WLAN Adaptor in other USB products
may result in damage to the WLAN Adaptor and
or the equipment. Such use will void any warranty
that may otherwise apply, and TOSHIBA will have
no liability for any damage that may result from
such use.
CAUTION:
• Bluetooth™ and Wireless LAN devices operate within
the same radio frequency range and may interfere
with one another. If you use Bluetooth™ and Wireless
LAN devices simultaneously, you may occasionally
experience a less than optimal network performance
or even lose your network connection.
• If you should experience any such problem,
immediately turn off either your Bluetooth™ or
Wireless LAN device.
• Actual performance can vary, including lower
wireless network capacity, data throughput rate,
range and coverage.
• Performance depends on many factors, conditions
and variables, including distance from the access
point, volume of network traffi c, building materials
and construction, operating system used, mix of
wireless products used, interference and other
adverse conditions.
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit
radio frequency electromagnetic energy. The level
of energy emitted by Wireless LAN devices, however,
is far less than the electromagnetic energy emitted
by wireless devices such as mobile phones.
Because Wireless LAN products operate within the
guidelines found in radio frequency safety standards
and recommendations, TOSHIBA believes Wireless
LAN is safe for use by consumers. These standards
and recommendations refl ect the consensus of the
scientifi c community and result from deliberations
of panels and committees of scientists who
continually review and interpret the extensive
research literature.
In some situations or environments, the use of
Wireless LAN may be restricted by the proprietor
of the building or responsible representatives of
the organization. Such restrictions may apply in
environments where the risk of interference to
other devices or services is perceived or identifi ed
as harmful.
If you are uncertain of the policy that applies to the
use of wireless devices in a specifi c organization
or environment, you are encouraged to ask for
authorization to use the Wireless LAN device prior to
turning on the equipment.
37