Page 2
Base assembly Follow the procedures below in order to assemble 4. After the stand is mounted to the TV, remove the LED TV base the stand’s protective film. 1. Before you begin to assemble the base, carefully support the LED TV, with the front facing down, on a flat and soft surface, such as a towel or blanket.
Important Safety Instructions........Exploring your new TV..........TV panel controls............Learning about the remote control....... TV back panel connections.......... Connecting HDMI or DVI devices......... Connecting an aerial............. Turning the TV on ............Select Input Source............Turning the TV for the first time........Main Menu Operation...........
Exploring your new TV TV panel controls TV front view Left side view INPUT (on-screen information or input source) –This button switches to the on-screen information or the input source selection. MENU Press to select the main menu. When selectable on-screen information is displayed, it can be selected by pushing CH ▼/▲...
LIST: Press it to show channel list on screen. 10. NICAM: NICAM button. 11. REC: Press to start recording. (Only in the DTV mode.) 12. Q.MENU: Press this key to go to quick menu. 13. INFO: Display the program information. 14.
Switching off the TV Press on the remote control or POWER on the TV left side panel to switch to the standby mode. TV may not display small text properly. Select Input Source Connecting an aerial Press INPUT button to display the input source list Press ▼/▲...
Auto Tuning First tuning ATV, press Menu and left arrow button to skip ATV tuning, Second tuning DTV, press Menu and left arrow button to skip DTV tuning. Main Menu Operation Channel Menu Press MENU button to display the main menu. Press ◄/►...
Page 11
ATV Manual Tuning Current CH Set the channel number. Color System Select the color system (Available System: AUTO, PAL, SECAM ) Sound System Select the Sound system Fine-Tune Adjust the frequency of the channel finely. Search After setting the channel number and frequency, you can choose “search”...
Page 12
Picture Mode Press ▼/▲ button to select Picture Mode, then press OK button to enter sub-menu. You can change the value of contrast, brightness, color, Cool: Increase the blue tone for the white. sharpness and tint when the picture is in User mode. Medium: Increase the sex-linked colors for the white.
Page 13
Sound Mode Press ▼/▲ button to select Sound Mode, then press Enter button to enter sub-menu. Press▼/▲ button to select. NOTE: Balance: This item can adjust the speaker’s output, it enables you to listen to best at your position. Auto Volume: This item is used for reducing the difference between channel and program’s volume automatically.
Page 14
Time Zone Auto Standby Press ▼/▲ button to select Time Zone, then press Press ▼/▲ button to select Auto Standby, then press Enter button to enter sub-menu. Enter button to enter sub-menu. Press ▼/▲ button to select. Tips: The remote control does not make any operation in the hypothesis time, it will close down automatically.
Page 15
Lock Menu Press MENU button to display the main menu. Press ◄/► button to select Lock in the main menu. 1. Press ▼/▲ button to select the option that you want to adjust in the SYSTEM LOCK menu. 2. Press Enter/◄/► button to adjust. 3.
Page 16
Hotel Mode Press ▼/▲ button to select Hotel Mode, then press ◄/► button to select on or off. Source Lock Press ▼/▲ button to select Source Locke, then press Enter button to enter sub-menu to select. Default Source Press ▼/▲ button to select Default Source, then press Enter button to enter sub-menu to select.
Page 17
Screen Menu Press MENU button to display the main menu. Press ◄/► button to select SCREEN in the main menu. Hearing Impaired Press ▼/▲ button to select Hearing Impaired, then press Enter button to select On or Off. Aspect Ratio Press ▼/▲...
Media Operation Note: Before operating Media menu, Plug in USB device, then press INPUT button to set the Input Source to Media . Press ▼/▲ button to select Media in the Source menu, then press Enter button to enter. Press ◄/► button to select the option you want to adjust in the main Media menu, then press Enter button to enter.
Page 19
Movie Menu Press ◄/► button to select MOVIE in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press ◄/► button to select drive disk you want to watch, then press Enter button to enter.
LED TV 32S255* Series 40S255* Series 110-240V AC, 50/60Hz 32S255* Series: 65W, 0.5W 40S255* Series: 75W, 0.5W 32S255* Series: 734 x 180 x 489 mm (with base) 734 x 90 x 443 (without base) 40S255* Series: 923 x 220 x 595 mm (with base) 923 x 90 x 549mm (without base) 32S255* Series: 6.5 (with base) 40S255* Series...