Loading Discs - Toshiba R10 User Manual

Loading discs

To load CD/DVDs, follow the steps as detailed below:
1. When the computer's power is on, press the eject button to open
the disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
3. Lay the CD/DVD, label side up, in the disc tray.
When the disc tray is fully opened, the edge of the computer will extend
slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD
at an angle when you place it in the disc tray. After seating the CD/DVD,
however, make sure it lies flat.
User's Manual
Figure 4-4 Pressing the eject button and pulling the disc tray open
Figure 4-5 Inserting a CD/DVD
Disc tray
Operating Basics
Eject button
Laser lens
4-15