Removing A Memory Module - Toshiba mini NB250 series User Manual

5. Seat the memory module cover in place and secure it with one screw.
Take care to ensure that the memory module cover is firmly closed.
1. Memory module cover
6. Install the battery pack - refer to
Chapter 6,
7. Turn your computer over.
8. Turn the computer on and make sure the added memory is recognized -
to confirm this select Start
Security

Removing a memory module

To remove the memory module, follow the steps as detailed below:
1. Turn the computer off and remove all cables connected to the computer.
2. Turn the computer upside down and remove the battery pack (refer to
Chapter 6,
3. Remove one screw securing the memory module cover.
4. Lift off the memory module cover.
5. Push the latches outward and the memory module will pop up.
6. Grasp the memory module by the sides and pull it out.
7. Seat the memory module cover in place and secure it with one screw.
8. Install the battery pack - refer to
Chapter 6,
9. Turn your computer over.
User's Manual
Seating the memory module cover
Power and Power-up
Control Panel
System icon.
Power and Power-up
Power and Power-up
2. Screw
Replacing the battery pack
Modes, if required.
System and
Modes.)
Replacing the battery pack
Modes, if required.
Optional Devices
1
2
section in
section in
8-6