Looping - Numark Axis 9 Quick Start Owner's Manual

LOOPING OPERATIONS
A loop is any area of a CD that you choose to repeat seamlessly. On the AXIS
8/9 two seamless loops are possible.
LOOP IN: is the point where you wish for the loop to start.
"CUE" or "PLAY" point of the CD is also the default "LOOP IN" point for
both loops or "Hot Start" point. If you wish to set a new "LOOP IN"
point, just press "LOOP IN" while the CD is playing when it reaches
the desired point. The "LOOP IN" button will light indicating a new
loop is set. The "RELOOP/STUTTER" button and
display will also illuminate indicating a point has been set and is
accessible for "STUTTER". By default the "LOOP IN" also becomes the
"STUTTER" or "HOT START" point.
The CD Player will always remember a new set point as the "LOOP IN"
or "HOT START" point until you actually set a new "LOOP IN" point or
put in a new CD. The new point will be accessible until you remove the
CD from the unit. If you change tracks and you previously set a "Loop
In" on another track, pressing "RELOOP/STUTTER" will jump to that
point.
LOOP OUT: is the end point for a loop. The first time you press "LOOP
OUT" while a CD is in play mode, the "LOOP OUT" LED will turn on
and flash while the song automatically returns to the "LOOP IN" point
with no breaks and continues to play.
"LOOP OUT" point again it returns to the "LOOP IN" point and
continues to repeat this action.
also be flashing during loop action.
"LOOP OUT" a second time and play will continue forward when the
song passes the previously set "LOOP OUT" point.
LED will be lit solid indicating that the LOOP is now in memory for
"RELOOP" purposes.
When the song reaches the
You will notice the "LOOP IN" LED will
To release or end the LOOP press
-10-
The initial
in the
The "LOOP OUT"