Numark Axis 9 Quick Start Owner's Manual page 17

Time: switches the time modes on the display between elapsed
playing time, remaining time on the track and remaining time on
the entire CD. This setting will be remembered at power down.
Single: toggles the unit to play back just one track at a time (single)
or play continuously through all tracks and then start over
repeating the CD infinitely (continuous). This setting will be
remembered at power down.
You have an option for eliminating the dead space at the end of
tracks during continuous mode. The unit already automatically
removes dead space at the beginning of tracks. End of track dead
space elimination is useful if you are playing a CD continuously
and want to eliminate all the gaps between songs.
"PROG" followed by "SGL". The display will indicate "
when the function is set to eliminate space and indicates "
" when the unit is left to leave the natural space between
tracks. This setting will be remembered at power down.
Track Selection: Rotate the dial to quickly find the desired track. To
advance by +10, press the knob while rotating.
You can also pre program the desired sequence of songs Track
sequence programming can be done by pressing "PROG" while
the unit is stopped and "
track to be programmed then press "PROG" between selections.
Press "PLAY/STUTTER" to start the track sequence program
playing. To exit and erase program hold "PROG" for more than 2
seconds while the unit is stopped, open the disc tray, or turn off
the power.
Search: Pressing the "TRACK" selector changes the
mode of the jog wheel to a search mode. Search
will remain active while the wheel is being moved
and for 8 seconds after. Moving the wheel clockwise
rapidly moves forward through the music.
Counterclockwise moves backwards through the
music. There are 2 search speeds depending upon
wheel rotation speed.
" will light. Select each
-5-
Press
"