Advertisement
Sony Installation
______ Secure all of the connector screws.
System 4xi Series – Sony Projector Connections
____________ In a rack mount, do NOT allow the weight of the cables to be supported by the
____________ See the following pages for stacking Sony projectors.
Extron • System 4 xi Switcher Series • User's Manual • P/N 68-408-02 Rev. A
5. The Sony Comm Adapter (SY COM) has a 9-pin male connector that
accommodates the Comm Extension cable. It also has eight BNC connectors for
all video signals. Both control and video signals are combined in a cable with a
single, 14-pin connector. This plugs into the projector's "Remote 1" connector.
6. Plug the 15-pin HD connector of the Projector Communications Extension cable
into the PJ Comm port on the System 4xi.
7. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV
cable onto the System 4xi output and those on the other end onto the matching
BNCs on the Sony connector panel.
Use the illustration below as a guide when connecting the System 4xi to a Sony
projector. Refer to Sony documentation to continue the installation.
System 4 xi . See page 2-5 for cabling guidelines.
Configuration and Connections
Page 2
Advertisement
