A-B Repeat; Playback In Scan Mode; Playback From A Specified Chapter/Track Or A Specified Time - Lanzar SDINBT75 User Manual

7'' motorized touch screen tft/lcd monitor with dvd/cd/mp3/mp4/am/fm/bluetooth
Table of Contents

Advertisement

2. In the mode of VCD(PBC OFF)/CD playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT button are not
available.
3. In the mode of MP3/WMA playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.

4.10.2 A-B Repeat

Press the A-B button if you want to repeat a specific segment on a disc that you define:
1. Press the A-B button at a point (A) where you want it to be the start point of the repeat
segment.Press the A-B button again at a point (B) where you want it to be the terminal point of
the repeat segment. Then it will play the segment repeatedly.
2. To cancel the A-B repeat mode and resume normal playback, press the A-B button for the
third time.
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.

4.11 Playback in Scan Mode

1. In the state of VCD(PBC OFF)/CD playing, press the INT button to play
the previous 15 seconds part of each track on the disc. Press the INT button
again to resume normal playback.
2. In the state of DVD/MP3/WMA playing, the INT button is not available.

4.12 Playback from a specified chapter/track or a specified time

1. In the state of DVD playing, press the SEARCH button to display a interface and highlight
the title item, then use the number buttons to input the serial number of the title; use the
direction buttons to highlight the chapter item,then use the number buttons to input the serial
number of the chapter; you can still use the direction buttons to highlight the time item, then
use the number buttons to input the desired time to start playback; finally press the OK or
PLAY button to play the selected chapter or play from the selected time.
2. In the state of VCD/MP3/WMA/CD playing, press the SEARCH button to display a
interface and highlight the track item, then use the number buttons to input the serial number
of the track; you can still use the direction buttons to highlight the time item, then use the
number buttons to input the desired time to start playback; finally press the OK or PLAY
button to play the selected track or play from the selected time.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com

Advertisement

Table of Contents
loading

Table of Contents