Installation Guide: 1.Slide monitor into dash mount S2 and then use fastener to tighten(Optional) 2.Firmly attach dash mount on a flat surface and adjust viewing angle of monitor by tightening the fastener at the side A.When you install the monitor into the seat head cushion make sure that the monitor connecting cable assembly has already been pull through by the supporting pipe.
Page 3
D.Connect the connecting cable assembly to the monitor. Maintenance E.Ensure there is no foreign material is trapped inside the enclosure, before pushing the monitor into the headrest shroud make sure that the monitor To avoid electrical shock ,do not open the enclosure. high voltage is present. is securely locked in place.
Need help?
Do you have a question about the SVHR56 and is the answer not in the manual?
Questions and answers