We are sure you will enjoy listening to your favorite music with this LANZAR component in your car audio System. For best result a professional car stereo installer for application advice or troubleshooting. Thank you for choosing LANZAR products for your auto-sound system.
CONTROLS AND OPERATION 1.POWER INPUT TERMINAL(12V): To be connected to the positive terminal of your vehicle battery or other constant +12V source. 2.GROUND INPUT TERMINAL: To be wired to the vehicle's chassis ground. 3.REMOTE TURN-ON INPUT TERMINAL(REMOTE): To be connected to the remote control wire or antenna lead of the source unit for remote ON/OFF.
Page 4
9. FRONT CHANNEL HIGH-PASS FREQUENCY SELECTOR: For selection of front channel high-pass crossover frequency between 32Hz and 800Hz (or 320Hz and 8KHz when its frequency multiplier is at x10 position). 10. REAR CHANNEL HIGH-PASS FREQUENCY SELECTOR: For selection of rear channel high-pass crossover frequency between 32Hz and 800Hz.
TROUBLE SHOOTING Symptom Possible remedy: Signal Processor Check: *Remote Turn-On wire has (+) 12V does not turn on. *(+) 12V wire has (+) 12V *Ground wire is properly connected: Level of sound is Check: *Wiring is not loose or cables misconnected/disconnected low.