We are sure you will enjoy listening to your favorite music with this LANZAR component in your car audio System. For best result a professional car stereo installer for application advice or troubleshooting. Thank you for choosing LANZAR products for your auto-sound system.
CONTROLS AND OPERATION 1. Ground Terminal (GND). 2. Remote Turn-On Terminal (REM). 3. Power Terminal (+12V). 4. Power Indicator. 5. Front Channel Inputs. 6. Parallel Input Switch: If there are 4 sets (2 pairs/ Front & Rear) RCA inputs available, place this switch in the "IN"...
Page 4
10. Front channel High-Pass frequency selector. 11. Rear channel High-Pass frequency selector. 12. Frequency Multiplier: for Front Channel High Pass Frequency selector. 13 & 14: Front and Rear Channel Slope Selectors: Move the selector switch to the 6 dB position when little or no attenuation as well as little or no separation is required between the selected frequency and the next adjacent frequency.
Dual Rear and Subwoofer System TROUBLE SHOOTING Symptom Possible remedy: Signal Processor Check: does not turn on. *Remote Turn-On wire has (+) 12V *(+) 12V wire has (+) 12V *Ground wire is properly connected: Level of sound is Check: *Wiring is not loose or cables misconnected/disconnected low.