1. Manuals
  2. Brands
  3. Stow Manuals
  4. Saw
  5. CD613H18
  6. Operation and parts manual

Stow CD613H18 Operation And Parts Manual

Concrete/asphalt saw
Hide thumbs Also See for CD613H18:
Table of Contents

Advertisement

Quick Links

OPERATION AND PARTS MANUAL
CUTTER 1
MODEL CD613H18
(HONDA GX390 GASOLINE ENGINE)
MODEL CD605E16
(5 HP ELECTRIC MOTOR)
CONCRETE/ASPHALT SAW
Revision #6 (06/06/08)
To find the latest revision of this
publication, visit our website at:
www.stowmfg.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
P/N 25498

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD613H18 and is the answer not in the manual?

Questions and answers

Related Manuals for Stow CD613H18

Summary of Contents for Stow CD613H18

  • Page 1 OPERATION AND PARTS MANUAL CUTTER 1 MODEL CD613H18 (HONDA GX390 GASOLINE ENGINE) MODEL CD605E16 (5 HP ELECTRIC MOTOR) CONCRETE/ASPHALT SAW Revision #6 (06/06/08) To find the latest revision of this publication, visit our website at: www.stowmfg.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

  • Page 2: Proposition 65 Warning

    STOW CUTTER 1 SAW — PROPOSITION 65 WARNING Engine exhaust some its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints.
  • Page 3 NOTES STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08) — PAGE 3...

  • Page 4: Table Of Contents

    STOW CUTTER 1 SAW — TABLE OF CONTENTS Proposition 65 Warning ..........2 HONDA GX390K1QWT2/ Table Of Contents ............. 4 GX390U1QWT2 ENGINES Parts Ordering Procedures ........5 Air Cleaner Assembly......... 42-43 Safety Message Alert Symbols ......6-7 Camshaft Assembly ........... 44-45 Rules For Safe Operation ........

  • Page 5: Parts Ordering Procedures

    Parts Department: STOW CONSTRUCTION EQUIPMENT STOW CONSTRUCTION EQUIPMENT STOW CONSTRUCTION EQUIPMENT STOW CONSTRUCTION EQUIPMENT STOW CONSTRUCTION EQUIPMENT A DIVISION OF MULTIQUIP INC. Toll-free nationwide — 800-427-1244 POST OFFICE BOX 6254 CARSON, CA 90749 888-252-STOW [888-252-7869] 310-537-3700 Toll-free FAX — 800-6-PARTS-7...

  • Page 6: Safety Message Alert Symbols

    STOW CUTTER 1 SAW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating Lethal Exhaust Gases this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to Engine exhaust gases contain poisonous yourself and others.
  • Page 7 STOW CUTTER 1 SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the saw ALWAYS wear approved respiratory protection. is not in use. Over Speed Conditions Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor or settings.

  • Page 8: Rules For Safe Operation

    , or if fuel is spilled on a hot! engine. ■ NEVER use accessories or attachments, which are not recommended by STOW or Multiquip for this equipment. Damage to the equipment and/or injury to user may result. ■ NEVER operate the saw in an explosive atmosphere where ■...
  • Page 9 STOW CUTTER 1 SAW — RULES FOR SAFE OPERATION ■ MAKE CERTAIN the power cord/extension cord is free from General Safety damage and that the grounding circuit is operational. ■ ALWAYS read, understand, and follow procedures in ■ MAKE CERTAIN the extension cord that you are using is Operator's Manual before attempting to operate equipment.
  • Page 10 STOW CUTTER 1 SAW — RULES FOR SAFE OPERATION Saw Transportation Safety Machine Operation And Safety Decals ■ Use appropriate lifting equipment to ensure the safe The STOW CUTTER 1 SAW is equipped with a number of movement of the saw. operation and safety decals.

  • Page 11: Specifications (Saw)

    STOW CUTTER 1 SAW — SPECIFICATIONS (SAW) Side View Front View Figure 2. STOW CUTTER 1 SAW Dimensions r e t i f i o i t r e t e s i r e t . n I s b l ) g .

  • Page 12: Specifications (Engine)

    STOW CUTTER 1 SAW — SPECIFICATIONS (ENGINE) i f i o i t - r i r t s i l y , r e i l o . n i o r t p s i . n i / .

  • Page 13: Stow - Cutter 1 Saw Controls & Components

    STOW CUTTER 1 SAW — CONTROLS & COMPONENTS CONTROLS & COMPONENTS Cutting Blade – Use appropriate type blades for cutting concrete or asphalt. Figure 3 shows the location of the basic controls or components for the STOW CUTTER 1 SAW. Listed below is a brief Blade Guard –...

  • Page 14: Basic Engine

    STOW CUTTER 1 SAW — BASIC ENGINE BASIC ENGINE Figure 4. Engine Controls and Components Choke Lever – Used in the starting of a cold engine, or in Initial Servicing cold weather conditions. The choke enriches the fuel The engine (Figure 4) must be checked for proper lubrication and mixture.

  • Page 15: Preparation/Pre-Inspection

    STOW CUTTER 1 SAW — PREPARATION/PRE-INSPECTION PREPARATION / PRE-INSPECTION WARNING 1. Read and fully understand this manual, the safety instructions in particular, and ALWAYS use a grounded (3-wire) extension cord and MAKE the engine manufacturer's manual CERTAIN that the motor is connected to a properly grounded supplied with the saw.
  • Page 16 STOW CUTTER 1 SAW — PREPARATION/PRE-INSPECTION 3. Insert and remove the dipstick without screwing it into the filler Guards And Covers neck. Check the oil level shown on the dipstick. WARNING 4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4).
  • Page 17 STOW CUTTER 1 SAW — PREPARATION/PRE-INSPECTION V-belt Alignment and Tensioning This saw is equipped with a premium V-belt that has been aligned and tensioned by factory personnel. The V-belt must be aligned and tensioned for proper operation of the saw. Use the following procedure to check the alignment of V-belt: 1.

  • Page 18: Blades

    STOW CUTTER 1 SAW — BLADES BLADES 2. Edge of the Steel Core - Check the diameter edge for discoloration (blue oxidation) indicating an overheating Saw blades, or cutting disks, are available in either an abrasive condition caused by insufficient cooling water/air. design or as diamond blades.

  • Page 19: Blade Placement

    STOW CUTTER 1 SAW — BLADE PLACEMENT BLADE PLACEMENT WARNING WARNING Dropping or forcing the blade onto the cutting Failure to thoroughly inspect the diamond surface can severely blade for operational safety could result in damage the diamond blade and may damage to the blades or the saw and may cause serious damage to the saw and cause injury to the user or others in the...

  • Page 20: Initial Start-Up

    STOW CUTTER 1 SAW — INITIAL START-UP INITIAL START-UP 3. Place the Engine ON/OFF switch (Figure 13) in the "ON" position. CAUTION CAUTION CAUTION CAUTION CAUTION DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood.

  • Page 21: Operation

    STOW CUTTER 1 SAW — INITIAL START-UP/OPERATION 5. Rotate the throttle lever (Figure 15) halfway between fast 8. Before the saw is placed into operation, run the engine for and slow for starting. All sawing is done at full throttle . The several minutes.

  • Page 22: Maintenance

    STOW CUTTER 1 SAW — MAINTENANCE MAINTENANCE 3. Adjust the front pointer wheel so it just touches the side of the straightedge or level. See the engine manual supplied 4. Remove the straightedge or level. NOTE with your machine for appropriate engine maintenance schedule and 5.
  • Page 23 STOW CUTTER 1 SAW — MAINTENANCE Dispose of used oil properly. DO NOT pour used oil on the ground, down a drain, or throw in the trash. NOTE Used oil can generally be taken to your local recycling center or service station for reclamation.

  • Page 24: Troubleshooting (Saw)

    STOW CUTTER 1 SAW — TROUBLESHOOTING (SAW) t l u r e l i t l u r o f e r r i t t a i r t f o a i r l i s a c i i r b , k c n i c...

  • Page 25: Troubleshooting (Engine)

    STOW CUTTER 1 SAW — TROUBLESHOOTING (ENGINE) i t a l i r b t i s c i f f t l u t r a f " , s i l l i a t r o r i c i u c i c i f o i t...
  • Page 26 STOW CUTTER 1 SAW — TROUBLESHOOTING (ENGINE) r i A r i a e l c . r e o l f s u j . t n l e v " " r e i s s d l i t e r .
  • Page 27 NOTES STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08) — PAGE 27...

  • Page 28: Explanation Of Codes In Remarks Column

    Multiquip. A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column. PAGE 28 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)

  • Page 29: Suggested Spare Parts

    STOW CUTTER 1 SAW — SUGGESTED SPARE PARTS SUGGESTED SPARE PARTS STOW CUTTER 1 SAW CONCRETE/ASPHALT SAW 1 TO 3 UNITS WITH HONDA 13 HP GX390K1QWT2/GX390U1QWT2 ENGINES AND 5HP ELECTRIC MOTOR. 1 to 3 Units Qty..P/N ......Description 20478 ....HAND GRIP 2621 .....

  • Page 30: Nameplate And Decals

    STOW CUTTER 1 SAW — NAMEPLATE AND DECALS DECALS PAGE 30 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 31 STOW CUTTER 1 SAW — NAMEPLATE AND DECALS NAMEPLATE AND DECALS PART NO. PART NAME QTY. REMARKS 25215-001 DECAL, WARNING ......1 ..ELECTRIC MODEL ONLY 28997-001 DECAL, PROP 65 WARNING 13118 DECAL, POWDER COATED 22972-003 DECAL, STOW 6.00 23653-001 DECAL, STOW CUTTER 1 SAW SERIAL NUMBER PLATE ....

  • Page 32: Engine, Belts And Pulleys Assembly

    STOW CUTTER 1 SAW — ENGINE, BELTS AND PULLEYS ASSY. ENGINE, BELTS AND PULLEYS ASSY. PAGE 32 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 33 STOW CUTTER 1 SAW — ENGINE, BELTS AND PULLEYS ASSY. ENGINE, BELTS AND PULLEYS ASSY. PART NO. PART NAME QTY. REMARKS 15103 ENGINE 13 HP HONDA CYCLONE 1 0669 A SCREW. HHCS 5/16-18 x 2-1/4" 0300 B FLAT WASHER 5/16" 5283 NUT, 5/16 - 18 LOCK 23811-352...

  • Page 34: Electric Motor Assembly

    STOW CUTTER 1 SAW — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. PAGE 34 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 35 STOW CUTTER 1 SAW — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. PART NO. PART NAME QTY. REMARKS 26142-352 BELT GUARD 16779-006 BELT - 3VX300 23665-005 PULLEY (MOTOR) 26152-502 MOTOR, 5 HP ELECTRIC 27084-002 SPACER 23665-009 PULLEY (SPINDLE) 26145-351 FRAME 25215-001 LABEL, WARNING 23865-001 SCREW, 10 - 24 X 3/4...

  • Page 36: Undercarriage Assembly

    STOW CUTTER 1 SAW — UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY PAGE 36 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 37 STOW CUTTER 1 SAW — UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY. PART NO. PART NAME QTY. REMARKS 08233-005 LOCKNUT, 5/16 - 18 18637-001 KNOB 0161 D HEX NUT, 5/16 - 18 25496 BUSHING 28808-002 CRANK HANDLE 26164-001 LOCK PIN 4568 ROLL PIN 3/16 X 1 07046-011 BOLT, CARRIAGE 5/16-18 X 1-1/2 23284-001...

  • Page 38: Blade Assembly & Water System Assembly

    STOW CUTTER 1 SAW — WATER SYSTEM AND BLADE ASSY. WATER SYSTEM AND BLADE ASSY. PULLEY ASSEMBLY. SEE PAGE 30. PAGE 38 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 39 STOW CUTTER 1 SAW — WATER SYSTEM AND BLADE ASSY. WATER SYSTEM AND BLADE ASSY. PART NO. PART NAME QTY. REMARKS 22129-001 CLAMP 0948 FLAT WASHER, 1/4 0181 B LOCK WASHER 1/4 0949 HEX NUT 1/4 - 20 0424 SCREW, HHCS 1/4 - 20 X 1 29406-352 BLADE GUARD 18626-001...

  • Page 40: Pointer Assembly

    STOW CUTTER 1 SAW — POINTER ASSY. POINTER ASSY. PAGE 40 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 41 STOW CUTTER 1 SAW — POINTER ASSY. POINTER ASSY. PART NO. PART NAME QTY. REMARKS 21017 SCREW, POINTER ARM 29043-001 WHEEL, POINTER 1007 NUT, HEX JAM 3/8 - 16 1456 NUT, HEX FINISH 3/8 - 16 10133 NUT, NYLOC 3/8 - 16 27073-001 ARM, POINTER 10136...

  • Page 42: Honda Gx390K1Qwt2

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 42 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 43 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. PART NO. PART NAME QTY. REMARKS 16271ZE2000 GASKET, ELBOW 1◊ ◊ ◊ ◊ ◊ 16271ZE2010 GASKET, ELBOW 17210ZE3010 ELEMENT, AIR CLEANER ......1 ..INCLUDES ITEMS W/ 17218ZE3000 FILTER, OUTER 17219ZE3840 SEAL, AIR CLEANER COVER 17230ZE3841...
  • Page 44 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 44 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)

  • Page 45: Camshaft Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 14100ZF6W01 CAMSHAFT ASSEMBLY ......1 ..INCLUDES ITEM W/ 14410ZE3013 ROD, PUSH 14431ZE2010 ARM, VALVE ROCKER 14441ZE2000 LIFTER, VALVE 14451ZE1013 PIVOT, ROCKER ARM 14568ZE1000 SPRING, WEIGHT RETURN 14711ZE3000 VALVE, INTAKE 14721ZE3000...

  • Page 46: Carburetor Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 46 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 47 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. PART NO. PART NAME QTY. REMARKS 16010ZE2812 CARBURETOR, GASKET SET INCLUDES ITEMS W/ 16011ZA0931 VALVE SET, FLOAT 16013ZA0931 FLOAT SET 16015ZE8005 CHAMBER SET, FLOAT ...... 1 ..... INCLUDES ITEM 4A ................INCLUDES ITEM W/> GASKET, CHAMBER SET FLOAT ......

  • Page 48: Control Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. PAGE 48 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 49 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. PART NO. PART NAME QTY. REMARKS 16551ZE3000 ARM, GOVERNOR 16555ZE3000 ROD, GOVERNOR 16561ZE3000 SPRING, GOVERNOR 16562ZE3000 SPRING, THROTTLE RETURN 16570ZE3W20 CONTROL ASSY. (REMOTE) ....1 ..INCLUDES ITEMS W/ 16571ZE3W00 LEVER, CONTROL 16574ZE1000 SPRING, LEVER 16575ZE2W00...

  • Page 50: Crankcase Cover Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 50 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 51 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. PART NO. PART NAME QTY. REMARKS 11300ZE3602 COVER ASSY., CRANKCASE ......1 ....S/N 3287256 AND BELOW .................... INCLUDES ITEMS W/ > 11300ZE3604 COVER ASSY., CRANKCASE ......1 ....S/N 3287257 AND ABOVE ....................

  • Page 52: Crankshaft Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 52 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 53 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 13310ZF6W10 CRANKSHAFT .......... 1 ..INCLUDES ITEM W/ 2◊ ◊ ◊ ◊ ◊ 13310ZF6W11 CRANKSHAFT .......... 1 ..INCLUDES ITEM W/ # ................S/N 1113739 AND BELOW 2◊...

  • Page 54: Cylinder Barrel Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 54 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 55 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PART NO. PART NAME QTY. REMARKS 12000ZF6W13 CYLINDER ASSY. (ALERT) ....1 ....INCLUDES ITEMS W/ % 1◊ ◊ ◊ ◊ ◊ 12000ZF6417 CYLINDER ASSY........1 ....INCLUDES ITEMS W/ # 15510ZE2043 SWITCH ASSY., OIL LEVEL 2◊...

  • Page 56: Cylinder Head Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 56 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 57 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PART NO. PART NAME QTY. REMARKS 12200ZF6W01 CYLINDER HEAD ..........1 ....INCLUDES ITEMS W/ 1◊ ◊ ◊ ◊ ◊ 12200ZF6406 CYLINDER HEAD ..........1 ....INCLUDES ITEMS W/ % 12204ZE2306 GUIDE, VALVE (OS) (OPTIONAL) 12205ZE2305 GUIDE, EX.

  • Page 58: Fan Cover Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. PAGE 58 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 59 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. PART NO. PART NAME QTY. REMARKS 16731ZE2003 CLIP, TUBE 19610ZE3010ZB COVER, FAN *NH1* (BLACK) 19631ZE3W00 SHROUD 36100ZH7003 SWITCH ASSY., ENGINE STOP 13◊ ◊ ◊ ◊ ◊ 36100ZF6P81 SWITCH ASSY., ENGINE STOP ....1 ....S/N 1412956 AND BELOW 13◊...

  • Page 60: Flywheel Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 60 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 61 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. PART NO. PART NAME QTY. REMARKS 19511ZE3000 FAN, COOLING 28450ZE3W11 PULLEY, STARTER (SCREEN GRID) 31100ZE3701 FLYWHEEL 90201ZE3V00 NUT, SPECIAL (16MM) (1) 10◊ ◊ ◊ ◊ ◊ 90201ZE3V00 NUT, SPECIAL (16MM) (1) ......1 ....S/N 1317976 AND BELOW 10◊...

  • Page 62: Fuel Tank Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 62 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 63 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. PART NO. PART NAME QTY. REMARKS 16854ZH8000 RUBBER, SUPPORTER (107MM) 16955ZE1000 JOINT, FUEL TANK 17510ZE3010ZB TANK, FUEL *NH1* 6◊ ◊ ◊ ◊ ◊ 17510ZE3020ZB TANK, FUEL *NH1* ........... 1..S/N 1213085 AND BELOW 6◊...

  • Page 64: Ignition Coil Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 64 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 65 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. PART NO. PART NAME QTY. REMARKS 30500ZF6W02 COIL ASSY., IGNITION 1◊ ◊ ◊ ◊ ◊ 30500ZF6W02 COIL ASSY., IGNITION ........1..S/N 1411816 AND BELOW 1◊ ◊ ◊ ◊ ◊ 30500ZF6W03 COIL ASSY., IGNITION ........

  • Page 66: Muffler Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. PAGE 66 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 67 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. PART NO. PART NAME QTY. REMARKS 18310ZE2W61 MUFFLER 18320ZE2W61 PROTECTOR, MUFFLER 18330ZE2W00 PIPE, EX. 18331ZE3810 CAP, MUFFLER 6◊ ◊ ◊ ◊ ◊ 18331ZE3810 CAP, MUFFLER ............1 ..S/N 1166160 AND BELOW 6◊...

  • Page 68: Piston Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. PAGE 68 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 69 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. PART NO. PART NAME QTY. REMARKS 13010ZF6005 RING SET, PISTON (STD) 13011ZF6005 RING SET, PISTON (0.25) 13012ZF6005 RING SET, PISTON (0.50) 13013ZF6005 RING SET, PISTON (0.75) 13101ZF6W00 PISTON (STD) 13102ZF6W00 PISTON (0.25) 13103ZF6W00 PISTON (0.50) 13104ZF6W00...

  • Page 70: Recoil Starter Assembly

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 70 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 71 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. PART NO. PART NAME QTY. REMARKS 28400ZE3W01ZB STARTER ASSY., RECOIL *NH1* (BLACK) ....1 ..INCLUDES ITEMS W/ 28410ZE3W01ZB CASE, RECOIL STARTER *NH1* (BLACK) 28421ZE3W01 PULLEY, RECOIL STARTER 28422ZE2W01 RATCHET, STARTER 28441ZE2W01 SPRING, FRICTION 28442ZE2W01...

  • Page 72: Labels

    HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. PAGE 72 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08)
  • Page 73 HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. PART NO. PART NAME QTY. REMARKS 87522ZH9010 LABEL, CAUTION(ENGLISH ETC.) 1◊ ◊ ◊ ◊ ◊ 87516ZH7000 MARK OPERATOR CAUTION 1◊ ◊ ◊ ◊ ◊ 87516ZH7810 MARK OPERATOR PICTOGRAPH (OPTION) 87521ZF6W02 EMBLEM (GX390 HONDA 13.0) 2◊...

  • Page 74: Terms And Conditions Of Sale - Parts

    — TERMS AND CONDITIONS OF SALE PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS DROP SHIPMENTS Terms of payment for unit sales are 2% 15 days The sender will be notified of any material STOW reserves the right to refuse Drop net 30 days from date of invoice unless received that does not meet the above Shipments outside the normal service area of...
  • Page 75 NOTES STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #6 (06/06/08) — PAGE 75...
  • Page 76 The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations.

This manual is also suitable for:

Cd605e16

Table of Contents