1. Manuals
  2. Brands
  3. Stow Manuals
  4. Cutter
  5. CD613H18
  6. Operation and parts manual

Stow CD613H18 Operation And Parts Manual

Cutter 1 concrete/asphalt saws
Hide thumbs Also See for CD613H18:
Table of Contents

Advertisement

Quick Links

OPERATION AND PARTS MANUAL
CONCRETE/ASPHALT SAWS
CD613H18 (GASOLINE)
CD605E16 (ELECTRIC 5.0 HP)
STOW CONSTRUCTION EQUIPMENT
STOW CONSTRUCTION EQUIPMENT
STOW CONSTRUCTION EQUIPMENT
STOW CONSTRUCTION EQUIPMENT
STOW CONSTRUCTION EQUIPMENT
A DIVISION OF MULTIQUIP INC.
POST OFFICE BOX 6254
CARSON, CA 90749
310-537-3700 • 888-252-STOW [888-252-7869]
FAX: 310-537-1986 • FAX: 800-556-1986
E-MAIL: stow@multiquip.com • WWW: stowmfg.com
CUTTER 1
MODEL #
SERIAL #
Revision #4 (05/31/06)
PARTS DEPARTMENT:
800-427-1244
FAX: 800-672-7877
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-478-1244
FAX: 310-631-5032
P/N 25498

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD613H18 and is the answer not in the manual?

Questions and answers

Related Manuals for Stow CD613H18

Summary of Contents for Stow CD613H18

  • Page 1 STOW CONSTRUCTION EQUIPMENT PARTS DEPARTMENT: A DIVISION OF MULTIQUIP INC. 800-427-1244 POST OFFICE BOX 6254 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252-7869] 800-478-1244 FAX: 310-537-1986 • FAX: 800-556-1986 FAX: 310-631-5032 E-MAIL: stow@multiquip.com • WWW: stowmfg.com P/N 25498...

  • Page 3: Here's How To Get Help

    FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT 800-421-1244 FAX: 310- 537-4259 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310- 631-5032 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 3...

  • Page 4: Table Of Contents

    Undercarriage Assembly ........36-37 Blade Assembly & Water System Assembly..38-39 Pointer Assembly ..........40-41 NOTE Specifications and part numbers are subject to change without notice. PAGE 4 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 5: Parts Ordering Procedures

    310-537-3700 • 800-421-1244 Toll-free nationwide — 800-427-1244 FAX: 310-537-3927 E-MAIL: mq@multiquip.com WWW: multiquip.com STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 5 QP-202TH TRASH PUMP — PARTS MANUAL— REV. 1 (01/07/03) — PAGE 5...

  • Page 6: Safety Message Alert Symbols

    " Hazard Symbols " which appear throughout this manual, and will be referenced in conjunction with Safety " Message Alert Symbols ". PAGE 6 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 7 This concrete/asphalt saw , other NOTE property, or the surrounding environment could be damaged if you do not follow instructions. STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 7...

  • Page 8: Rules For Safe Operation

    ■ NEVER use fuel as a cleaning agent. ■ ALWAYS check the saw for loosened hardware such as nuts and bolts before starting. PAGE 8 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 9 ■ Ensure that the blade is mounted for proper operating end. If the rotation of the shaft is incorrect make necessary direction. changes for the correct shaft rotation. STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 9...
  • Page 10 , doctor, and fire department . This information will be invaluable in the case of an emergency. Figure 1. STOW CUTTER 1 SAW Decals PAGE 10 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 11: Specifications (Saw)

    . n I ) . g ) g . STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 11...

  • Page 12: Specifications (Engine)

    - y l i t r l i o t r a . n i s b l ) . g PAGE 12 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 13: Stow - Cutter 1 Saw Controls & Components

    "OFF" position to shut the Wheels/Carriage Assembly – Heavy-duty polyurethane engine off. wheels with permanently sealed ball bearings. Figure 3. Cutter 1 STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 13...

  • Page 14: Basic Engine

    Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop 10. Fuel Tank – Holds unleaded gasoline. For additional the flow of fuel. information refer to engine owner's manual. PAGE 14 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 15: Preparation/Pre-Inspection

    ) t e e f ( ) t e e f ( ) t e ) s r Figure 6. Engine Oil Dipstick (Removal) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 15...
  • Page 16 3. When refueling, be sure to use a strainer for filtration. DO from all moving parts. NOT top-off fuel. Wipe up any spilled fuel. PAGE 16 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 17 (sheaves). Use a straight-edge or machinist's square against both pulleys and adjust both pulleys until equally aligned. V-belt alignment must be NOTE rechecked after adjusting belt tension. STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 17...

  • Page 18: Blades

    Figure 11. Diamond Blade max RPM on the diamond blade. Exceeding the maximum RPM is dangerous and may cause poor performance and may damage the blade. PAGE 18 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 19: Blade Placement

    ■ Jack Arm The following steps should be NOTE accomplished before using the saw ■ Blade Guard on any cutting surface. ■ Adjusting Handle Crank STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 19...

  • Page 20: Initial Start-Up

    The engine speed has been set at the factory. Changing the governor speed could damage the blade and/or the saw. Figure 12. Engine Fuel Valve Lever PAGE 20 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 21: Operation

    1 through 6. 5. If cutting is complete, turn the engine off and wait for the blade to stop rotating. STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 21...

  • Page 22: Maintenance

    3. Drain the oil completely and reinstall the drain plug. Ensure surface. the drain plug is tightened securely. 2. Use a 4 foot straightedge or level by placing it flat against the blade. PAGE 22 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 23 5. Screw in the filler cap/dipstick securely. CAUTION CAUTION CAUTION CAUTION CAUTION Running the engine with a low oil level can cause engine damage. Figure 17. Engine Oil Change STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 23...

  • Page 24: Troubleshooting (Saw)

    . t u y l p n i t PAGE 24 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 25: Troubleshooting (Engine)

    . r e t e r . r o r i A n i l n i l STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 25...
  • Page 26 PAGE 26 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 27 NOTE PAGE STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 27...

  • Page 28: Explanation Of Codes In Remarks Column

    (or latest) part available. If more than one of the same NOTE reference number is listed, the last one listed indicates newest (or latest) part available. PAGE 28 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 29: Suggested Spare Parts

    2 ...17210ZE2505 ..AIR CLEANER ELEMENT 1 ...28462ZV7003 ..ROPE, RECOIL STARTER The contents of this parts catalog NOTE are subject to change without notice. STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 29...

  • Page 30: Nameplate And Decals

    STOW CUTTER 1 SAW — NAMEPLATE AND DECALS DECALS PAGE 30 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 31 DECAL, WARNING FEET 22972-004 DECAL, STOW 7.00 23330-001 DECAL, CAUTION BLADE GUARD 1 25491 DECAL, ROTATION 25249-001 DECAL, WARNING HANDS 11246 DECAL SHEET, INTL STDS. STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 31...

  • Page 32: Engine, Belts And Pulleys Assembly

    STOW CUTTER 1 SAW — ENGINE, BELTS AND PULLEYS ASSY. ENGINE, BELTS AND PULLEYS ASSY. PAGE 32 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 33 SCREW, 5/16 - 12 X 1 161 C WASHER, LOCK 5/16 26112-354 FRAME 9152 KEY, 1/4 X 1-3/4 10779-011 10133 NUT, 3/8 - 16 10136 WASHER, FLAT 3/8 STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 33...

  • Page 34: Electric Motor Assembly

    STOW CUTTER 1 SAW — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. PAGE 34 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 35 SCREW, 10 - 24 X 3/4 2623 SCREW, HHC 5/16 -18 x 1-1/4" 07030-005 FLAT WASHER 5/16 26136-004 SPINDLE 5283 NUT, 5/16 - 18 LOCK STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 35...

  • Page 36: Undercarriage Assembly

    STOW CUTTER 1 SAW — UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY ORDERABLE AS ASSEMBLY P/N 23666-001 OR SEPARATELY; BEARING P/N 11149, CLAMP P/N 11138. PAGE 36 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 37 CLAMP & BEARING ASSEMBLY 2 11138 CLAMP ASSEMBLY 11149 BEARING 23668-001 REAR WHEEL, (6 X 2) 26133-001 LOCKING COLLAR 8151 FLAT WASHER, 3/4 26121-001 FRONT WHEEL STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 37...

  • Page 38: Blade Assembly & Water System Assembly

    STOW CUTTER 1 SAW — WATER SYSTEM & BLADE ASSY. WATER SYSTEM & BLADE ASSY. Multiquip Diamond Back Blades ORDER p/n 9SWG PULLEY ASSEMBLY. SEE PAGE 30. PAGE 38 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 39 WOODRUFF KEY 1/4 X 1 1162 A CAP, GREASE ZERK 26135-002 SPINDLE 9152 KEY 1/4 X 1-3/4 2621 GREASE ZERK 9SWG BLADE, DIAMOND BACK STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 39...

  • Page 40: Pointer Assembly

    STOW CUTTER 1 SAW — POINTER ASSY. POINTER ASSY. PAGE 40 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 41 NUT, HEX FINISH 3/8 - 16 10133 NUT, NYLOC 3/8 - 16 27073-001 ARM, POINTER 10136 WASHER, FLAT 3/8 29042-501 INDICATOR ASSEMBLY ....1 ..INCLUDES ITEMS W/ STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 41...

  • Page 42: Air Cleaner Assembly

    HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 42 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 43 CAP, PRE AIR CLEANER 17476ZE3841 GUIDE, PRE AIR CLEANER 90142MB0000 SCREW, PAN 5X16.5 90325044000 WINGNUT, TOOL BOX SETTING 90009ZE2003 BOLT- WASHER 6X22 0405006000 NUT, FLANGE 6MM STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 43...
  • Page 44 HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 44 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)

  • Page 45: Camshaft Assembly

    14775ZE2010 SEAT, VALVE SPRING 14781ZE2000 ROTATOR, VALVE 14791ZE2010 PLATE, PUSH ROD GUIDE 90012ZE0010 BOLT, PIVOT 8MM 90206ZE1000 NUT, PIVOT ADJ. 12209ZE8003 SEAL, VALVE STEM STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 45...

  • Page 46: Carburetor Assembly

    HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 46 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 47 99101ZH80980 JET, MAIN (#98) (OPTIONAL) 99101ZH81000 JET, MAIN (#100) 99204ZA00450 JET SET, PILOT (#45) ......1 ..... INCLUDES ITEM W/ # 16172ZE3W10 COLLAR, SET STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 47...

  • Page 48: Control Assembly

    HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 48 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 49 BOLT, FLANGE (6X12) (CT200) 90015ZE5010 BOLT, GOVERNOR ARM 90114SA0000 NUT, SELF-LOCK (6MM) 93500050320A SCREW, PAN (5X32) 93500050160A SCREW, PAN (5X16) 9405006000 NUT, FLANGE (6MM) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 49...

  • Page 50: Crankcase Cover Assembly

    HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 50 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 51 PIN, DOWEL (8X12) 91201ZE3004 OIL SEAL (35X52X8) 9410106800 WASHER, PLAIN (6MM) 957010804000 BOLT, FLANGE (8X40) 961006202000 BEARING, RADIAL BALL (6202) 961006207000 BEARING, RADIAL BALL (6207) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 51...

  • Page 52: Crankshaft Assembly

    HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 52 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 53 PART NO. PART NAME QTY. REMARKS 13310ZF6W10 CRANKSHAFT (Q-TYPE)......1 ..INCLUDES ITEM W/ 13351ZE3010 WEIGHT, BALANCER 90745ZE2600 KEY(6.3X6.3X43) 91001ZF6003 BEARING, RADIAL BALL (6207S) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 53...

  • Page 54: Cylinder Barrel Assembly

    HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 54 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 55 WASHER, DRAIN PLUG (12MM) 9425110000 PIN, LOCK (10MM) 957010601200 BOLT, FLANGE (6X12) 961006202000 BEARING, RADIAL BALL (6202) 34150ZH7003 ALERT UNIT, OIL 90013883000 BOLT, FLANGE (6X12) (CT200) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 55...

  • Page 56: Cylinder Head Assembly

    HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 56 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 57 90441ZE2010 WASHER, HEAD COVER 9430112200 PIN A, DOWEL (12X20) 957011008000 BOLT, FLANGE (10X80) 9807955846 SPARK PLUG (BPR5ES) (NGK) (OPT.) 9807956846 SPARK PLUG (BPR6ES) (NGK) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 57...

  • Page 58: Fan Cover Assembly

    HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 58 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 59 PART NAME QTY. REMARKS 16731ZE2003 CLIP, TUBE 19610ZE3010ZB COVER, FAN *NH1* (BLACK) 19631ZE3W00 SHROUD 36100ZH7003 SWITCH ASSY., ENGINE STOP 90013883000 BOLT, FLANGE (6X12) (CT200) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 59...

  • Page 60: Flywheel Assembly

    HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 60 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 61 PART NAME QTY. REMARKS 19511ZE3000 FAN, COOLING 28450ZE3W11 PULLEY, STARTER (SCREEN GRID) 31100ZE3701 FLYWHEEL 90201ZE3V00 NUT, SPECIAL (16MM) (1) 90741ZE2000 KEY, SPECIAL WOODRUFF (25X18) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 61...

  • Page 62: Fuel Tank Assembly

    HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 62 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 63 GASKET, FUEL FILLER CAP 91353671003 O-RING (13.5X1.5) (ARAI) 9405008000 NUT, FLANGE (8MM) 950014500360M BULK HOSE, FUEL (4.5X3000) (4.5X235) 9500202080 CLIP, TUBE (B8) 957010802500 BOLT, FLANGE (8X25) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 63...

  • Page 64: Ignition Coil Assembly

    HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 64 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 65 COIL ASSY., IGNITION 30700ZE1013 CAP ASSY., NOISE SUPPRESSOR 31512ZE2000 GROMMET, WIRE 36101ZE2701 WIRE, STOP SWITCH (430MM) 90015883000 BOLT, FLANGE (6X28) 90684ZA0601 CLIP, WIRE HARNESS STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 65...

  • Page 66: Muffler Assembly

    HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER (1) ASSY. PAGE 66 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 67 GASKET, MUFFLER (ARRESTER) (OPTIONAL) 18381ZE2800 GASKET, MUFFLER 90050ZE1000 SCREW, TAPPING (5X8) 90055ZE1000 SCREW, TAPPING (4X6) 90006ZE2000 SCREW, TAPPING (6X10) 9405008000 NUT, FLANGE (8MM) 90055ZE1000 SCREW, TAPPING (4X6) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 67...

  • Page 68: Piston Assembly

    HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 68 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 69 ROD ASSY., CONNECTING (STD) ......1 ..INCLUDES ITEM W/ 13200ZE3315 ROD ASSY., CONNECTING(US 0.25) (OPT.) ..1 ..INCLUDES ITEM W/ 90001ZE8000 BOLT, CONNECTING ROD 90601ZE3000 CLIP, PISTON PIN (20MM) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 69...

  • Page 70: Recoil Starter Assembly

    HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 70 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 71 28442ZE2W01 SPRING, STARTER RETURN 28443ZE2W01 SPRING, RATCHET 28444ZE2W01 RETAINER, SPRING 28461ZE2W02 GRIP, STARTER 28462ZV7003 ROPE, RECOIL STARTER 90004ZE2W01 SCREW, CENTER 90008ZE2003 BOLT, FLANGE (6X10) STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 71...

  • Page 72: Labels

    HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 72 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 73 EMBLEM 87522ZH9000 LABEL, CAUTION 87528ZE2810 MARK, CHOKE (EXTERNAL) 87532ZH8810 MARK, OIL ALERT (E) 87534ZE1841 LABEL, AIR CLEANER CAUTION 87535ZE1840 MARK, AIR CLEANER SALES POINT STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 73...

  • Page 74: Terms And Conditions Of Sale - Parts

    Multiquip’s designated receiving point. at the time of any price change. PAGE 74 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06)
  • Page 75 NOTE PAGE STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV. #4 (05/31/06) — PAGE 75...
  • Page 76 STOW CONSTRUCTION EQUIPMENT PARTS DEPARTMENT: 800-427-1244 A DIVISION OF MULTIQUIP INC. POST OFFICE BOX 6254 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252-7869] 800-478-1244 FAX: 310-537-1986 • FAX: 800-556-1986 FAX: 310-631-5032 E-MAIL: stow@multiquip.com • WWW: stowmfg.com...

This manual is also suitable for:

Cd605e16

Table of Contents