Dial Cycles - GE GSD2200 Owner's Manual

About the dial cycles.
Rinse Only
START
HOT START
For rinsing partial loads that will be washed later. Do not use detergent.
OPTION
OFF
SHORT WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Plate Warmer
START
HOT START
OPTION For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.
OFF
SHORT WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Hot Start
START
HOT START
Preheats wash water to the correct temperature.
OPTION
OFF
SHORT WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Short Wash/Light Wash
START
HOT START
OPTION For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
OFF
SHORT WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
6
Make sure HEATED DRY OFF is selected.
1
Be sure the door is unlatched.
2
Slowly turn the Dial to RINSE ONLY.
3
4 Latch the door to start the cycle.
1 Load clean dishware to be warmed.
Select HEATED DRY ON.
2
Be sure the door is unlatched.
3
Slowly turn the Dial to PLATE WARMER.
4
5 Latch the door to start the cycle.
Select the HOT START cycle and any other option.
1
2 Be sure the door is unlatched.
Slowly turn the Dial to HOT START .
3
Latch the door to start the cycle.
4
Be sure the door is unlatched.
1
Slowly turn the Dial to SHORT WASH/LIGHT WASH .
2
3 Latch the door to start the cycle.