Disc Auto Upgrade; The Player - Toshiba BDX1100KC Owner's Manual

6. Press OK, enter Resolution setting. . Press OK, enter Resolution setting.
Choose
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
Previous
Press / to select an option. Press OK.
Select "Yes" or "No" using /.
Note:
-When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resolution is
set to 720p/1080i/1080p, there will be no video
output through VIDEO OUTPUT jack.
Resolution
14s
has been changed!
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
Previous
7. Press OK, enter Aspect ratio setting. . Press OK, enter Aspect ratio setting.
Choose
an aspect ratio that fits your TV.
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
Previous
Press / to select an option. Press OK.
Setting
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
Previous
8. Press OK to return to [General Setting] . Press OK to return to [General Setting]
Menu.
• [Upgrade]
For software upgrades to enhance
performance, you could select the
following upgrade method and start to
upgrade.
{ Disc }/{SD CARD}
Upgrade the software from the disc or
SD card.
1. Insert the disc or connect the SD
card which contains the upgrade file
package.
2. Follow the instruction on the TV
screen to confirm upgrade operation.
- The system will reboot after 5 seconds
or OK key is pressed.
Auto
480I/576I
480P/576P
720P
1080I
1080P
OK Next
Yes
No
Next
OK
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK Next
Finish
OK
Notes:
- If set [Disc Auto Playback]to [Off], after you insert
the disc that contains the upgraded information
to upgrade system, you have to start upgrade from
this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not complete)
- Make sure the firmware version is not an old
version.
- When you upgrade the system using SD card, you
should make a new folder named UPG_ALL, and
copy the upgrade file into this folder.
• [Disc Auto Upgrade]
Turn On or Off the disc automatic upgrade
switching mode.
{On} - Start upgrading from the insert
disc.
{Off} - Disable disc auto upgrade mode.
[External Memory]
•
External Memory would be used in BD
Live function. When you plug in the SD
card which has at least 1GB free space to
play BD-Live function, the BD system
would make a directory named BUDA
automatically. Information will display
the Free size.
1. Press OK.
2. Follow the instruction on the TV
screen to select {Information}.
... General Setting ...
Screen Save
System
Disc Auto Playback
Language
Playback CEC
Free size is : 0MB
Security

Disc Auto Upgrade

Network Load Default
Move cursor key to select menu option
then use "OK" key to select
3.Press OK to select "Erase", the data in
the BUDA folder will be cleared.
[Language]
Select the OSD(On-Screen Display), set up
Menu, Audio, Subtitle default language for

the player.

... General Setting ...
System OSD
Menu
Language
Audio
Playback
Subtitle
Security
Network
Move cursor key to select menu option
then use "OK" key to select
[OSD]
•
Select the default on-screen display language.
Off
Information
On
On
On
More...
Erase
RETURN Return
SETUP Exit
1